To remove the panel from the wall, you must slide in the
opposite direction and lift, until the knobs are in front of
the eyes again. Now you can take the panel off.
Note: Guide the electric cable and the thermostat cable
(if applicable) immediately downwards and make sure
that they do not come into contact with the panel. Do
not conceal any surplus cable behind the heater!
Use and working
Control panel
1. Main switch & pilot light
2. Temperature sensor
3. Display
4. Up/down key
5. ON/OFF switch
6. button M
7. Connection external temperature sensor
External temperature sensor (7)
Because the temperature sensor is located on the heater, it does
not measure the external temperature very accurately. If you want
accurate measuring, connect the separate thermostat (included in
the delivery) by inserting the small plug into the control panel and
placing the sensor approx. 2 metres away from the heater (see
illustration). For this purpose, you should remove the heater from
the wall and subsequently, place it back. When you have connected
the separate thermostat, it automatically takes over the thermostat
operation.
