56
• To remove the panel from the wall, you must lift the panel and move it in the opposite
direction until the pegs are facing the eyes of the suspension frame. Now you can
remove the panel.
Freestanding
1. Remove the bottom 4 screws on the back of the heater.
2. Place the supplied plastic plates on the back of the heater.
3. Place the feet in place with the screw holes (rear) on the bottom of the heater in place.
4. Slide the feet carefully over the plates.
5. Then securely fasten the feet to the stove with the screws supplied.
6. Make sure that a working stove is always on a firm, flat and horizontal surface. Long-pile
carpet is unsuitable.
Using for the first time and operation
• Check to make sure the main switch is set to O (off).
• Check that the heater is stable and upright, in line with instructions.
• Now insert the plug into the 220/240V socket.
• Set the main switch to I (on). The display will show: OFF
