19
Then undo the locking screw (X) almost entirely. Place the top of the patio
heater over the top of the adjustable stand section so that the locking screw falls
precisely into the recess on the stand. Now tighten the locking screw firmly. The
electrical cable can be secured in the cable holders on the stand.
Check that all connections are completely secure and that the terrace heater is
securely positioned before using it. The terrace heater must be placed firmly on
an even and completely horizontal surface. The top of the patio heater can tilt to
around 30°; set it to the position you prefer.
Stand Golden 1800S
The stand that is supplied with the Golden 1800S is
multifunctional. In the top of the narrow stand section, there is a
threaded section; a suitable screw with a black top is also
supplied. You can, therefore, also mount a lamp on the stand (see
diagram).
Patio heater functions
Golden 1800
Check that all of the safety requirements have been fulfilled.
Now insert the plug into the socket (230V-50Hz). The device will start to radiate.
You can stop it from operating by removing the plug from the socket.
Golden 1800S
The height of the heater top can be adjusted with the S-system. The black locking
screw (21) on the upper stand section must be undone and the adjustable stand
section can be pushed in/out of the upper section. Then tighten the screw up firmly.
The heater head must always be kept at least 180 cm above the floor.
Check that all of the safety requirements have been fulfilled.
Ensure that the position switch (Y) is set to 0.
Now insert the plug into the socket (230V-50Hz).
Pulling the pull cord (Z) once will switch the device
to position 1 and it will start operating at half power
(900W). Pulling it again will switch to position 2 (full
power, 1800 Watts). Pulling again will switch the
device off again.
By pressing one of the two operating switches (I
pressed), you can set the patio heater to half power
(1000W). By pressing the other switch in too, you
can also switch the second light on and the device
works at full power (2000W). Switch off the lamps
by pressing the switches again (O pressed).
Remove the plug from the socket when the patio
heater is not in use.
