Bedienungsanleitung Eva Calor ARIA 50 (Seite 10 von 31) (Englisch)

814107

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

05. MINIMUM INSTALLATION REQUIREMENTS

05.1 ARIA 30

FOR DOMESTIC USE:

INSTALLATION USING A WALL FLUE GAS OUTLET IS PROHIBITED. THE FUME OUTLET MUST BE OF A ROOF-TYPE AS PROVIDED FOR BY

NATIONAL REGULATIONS.

Eva Stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by the non-observance of the point

highlighted above

for non-compliant installed products.

Install the stove according to the regulations in force in the country of use.

In Italy, for example, this refers to UNI 10683: 2012, which refers to 4 areas:

a. preliminary activities – are under the jurisdiction and are the responsibility of the reseller/installer at the time of the pre-installation inspection. Preliminary

procedures include:

• installation site suitability check;

• fume evacuation system suitability check;

• external air inlet suitability check.

At this stage, the product needs to be checked in order that it can be safely operated and that the relevant technical specifications are met.

The safety conditions must be assessed with a preventive inspection.

Stoves and fireplaces are heating systems and as such must be installed safely and according to the manufacturer's instructions!

b. Installation – responsibility of the installer. In this phase, installation of the item and the fume evacuation system are considered as well as the handling

such topics as:

• Safety distances from combustible materials;

• chimney flue construction, fume ducting, intubated systems and chimney cowls.

c. Release of additional documentation – responsibility of the installer.

The release of technical documentation must include:

• Manual of use and maintenance of the appliance and of the components of the system (e.g. fume ducts, chimney flue, etc.);

• Photocopy or photograph of the chimney flue plate;

• System manual (if applicable);

• Declaration of Conformity in relation to Ministerial Decree 37/08

d. Control and maintenance – the responsibility of the maintenance technician who will have to deal with the care and maintenance of the product during its

use over time.

The operator responsible for checking and maintaining the systems for winter and summer climate control carries out tasks in a workmanlike manner and in

observance of applicable regulations. The operator, at the termination of these procedures, must draw up and sign a technical inspection report in accordance with

the models provided by the provisions of the decree and the implementation rules, in relation to the type and heat output of the system, to be issued to the person

who signs a copy, thereby confirming receipt and reading thereof.

FOR INDUSTRIAL USE (in Italy)

Fire regulations must be observed: appliances fall under ACTIVITY 74 and thus under Italian Ministerial Decree 28/04/2005.

(Approval of the technical fire prevention regulations for the design, construction and operation of heating systems powered by liquid or gaseous

fuels).

Eva Stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by the non-observance of national

fire prevention regulations.

05.2 ARIA 50

FOR INDUSTRIAL USE (in Italy)

Fire regulations must be observed: appliances fall under ACTIVITY 74 and thus under Italian Ministerial Decree 28/04/2005.

(Approval of the technical fire prevention regulations for the design, construction and operation of heating systems powered by liquid or gaseous

fuels).

Eva Stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by the non-observance of national

fire prevention regulations.

06. FLUE PIPE

The flue pipe is one of the key features for guaranteeing the proper functioning of the stove. Thanks to the quality of

the materials, the strength, the durability, the easy cleaning and maintenance, the best flue pipes are made of steel,

either stainless steel or aluminised.

• In order to facilitate connection to the rigid steel flue, it is advisable to use telescopic fittings which, in addition to

facilitating the procedure, also compensate for the thermal expansion of both the firebox and the flue itself.

• It is advisable to seal the flue pipe at the end of the appliance with silicone resistant to high temperatures

(1,000°C). Should the existing flue opening not be perfectly perpendicular to the firebox fume outlet, use an elbow

to connect them. The angle with respect to the vertical, must never exceed 45° (see figure to the side) and there

can be no bottlenecks.

• No constrictions. Use 10cm-thick insulating thimbles if pipe vent passes through floors.

• The flue pipe must be insulated along its entire length. The insulation will make it possible to maintain a high

fume temperature. To optimise the draught, avoid condensation and reduce deposits of unburnt particles on the

walls of the flue. Use proper insulating materials (glass wool, ceramic fibre, Class A1 non-combustible materials).

• The flue must be weatherproof and must not make more than two changes of direction.

• Flexible and length-adjustable metal pipes may not be used.

EXISTING FLUE PIPE (TRADITIONAL)

THE PRODUCTION OF STOVES WITH HIGHER PERFORMANCE IS INCREASINGLY REQUIRED SO IT IS BECOMES

ESSENTIAL TO ENSURE THAT INSTALLATIONS COMPLY WITH THE LAW. IF THE FLUE PIPE PASSES THROUGH

NON-HEATED ENVIRONMENTS, IT MUST BE INSULATED FOR CORRECT COMBUSTION.

CHOKE

TILT ANGLE

LESS THAN 45°

Eva Calor ARIA 50 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eva Calor ARIA 50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info