• To switch off the floor vacuum
cleaner, press the button
on/off (5) unplug it from the
receptacle and wind the cord
with the cord rewind button
(7).
• Carry the vacuum cleaner
easily by the handle.
16 Cleaning and maintenance
16.1 Replacement of the HEPA
filter
The HEPA filter is used to filter
viruses, respirable types of dust,
mite eggs and excretions, pollen,
smoke particles, asbestos,
bacteria, various toxic types of
dust and aerosols out of the air.
The HEPA filter is not washable.
1. Remove the grille from the
floor vacuum cleaner housing.
2. Change the K, L, M HEPA filter.
3. Put the grille into the vacuum
cleaner housing again.
PLEASE NOTE!
Danger due to faulty operation!
The HEPA filter must be changed every 6
months. The dirt filters and
motor filters must be renewed every
12 months. You can obtain a spare
filter set consisting of 6 floor vacuum
cleaner bags, 1 motor filter and 1 HEPA
filter from www.ggv-service.de
16.2 Replacing the motor filter
No illustration available.
• Open the floor vacuum
cleaner cover by the latch.
• Remove the floor vacuum
cleaner bag first and then
take the grille off the motor
filter.
• Change the motor filter and
insert the grille and the floor
vacuum cleaner bag again
• with the cover of the floor
vacuum cleaner
CAUTION
Risk of injury!
Improper handling of the vacuum
cleaner can
Lead to injuries.
Switch the vacuum cleaner off
every time before you clean or
maintain it and unplug it from the
receptacle.
Please note: Switch the
appliance off and unplug it every
time before you clean it. For
optimal use of the appliance and
to guarantee a longer life span,
empty the container regularly
and clean its filters.
ATTENTION
- Do not immerse the motor unit,
the plug or the power supply cord
in water or any other liquid.
(Clean it only with a dry cloth.)
- Clean the brushes and nozzles
regularly. Use water and a
sponge, which has been slightly
dipped into a liquid cleaning
agent. Then rinse it off
