Bedienungsanleitung Extraflame Fiandra Idro (Seite 28 von 36) (Englisch)

695872

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

CLEANING AND MAINTENANCE

ALWAYS FOLLOW THE INDICATIONS IN MAXIMUM SAFETY!

 Make sure that the power supply cable plug is disconnected, since the generator could be programmed to switch-on.

 That the generator is completely cold.

 The ashes are cold.

 Guarantee eective ventilation of the room when cleaning the product.

 Lack of cleaning jeopardises correct operation and safety!

MAINTENANCE

For correct functioning, the generator must undergo routine maintenance by a qualied technician, at least once a year.

The periodic controls and maintenance must always be performed by specialised technicians, which operate in compliance with the

regulations in force and the indications given in this use and maintenance manual.

PERIODIC CLEANING BY THE USER

As indicated in this use and maintenance manual, periodic cleaning must be performed paying great attention, after having read the

indications, to the procedures and times described herein.

CLEANING THE SURFACES AND COVERING

Never use abrasive or chemically aggressive detergents for cleaning!

The surfaces must be cleaned when the generator and covering are completely cold. For maintenance of surfaces and metal parts, just use a

cloth dampened in water or water and neutral soap.

Failure to comply with the indications can damage the surfaces of the generator and cause the warranty to become null and void.

CLEANING THE CERAMIC GLASS

Never use abrasive or chemically aggressive detergents for cleaning!

The ceramic glass must only be cleaned when cold!

To clean the ceramic glass, just use a dry brush and newspaper dampened and passed through the ash. If the glass is very dirty, use a detergent

specic for ceramic glass exclusively. Spray a modest amount on a cloth and use it on the ceramic glass. Do not spray the detergent or any

other liquid directly onto the glass or gaskets!

Failure to comply with the indications can damage the surface of the ceramic glass and cause the warranty to become null and void.

CLEANING THE PELLET HOPPER

When the hopper is completely empty, disconnect the generator power supply cable and rst remove the residues (dust, shavings, etc.) from

the empty hopper before lling it.

EVERY YEAR HAVE THE FUMES EXHAUST PLANT, FUME DUCTS AND "T" FITTINGS AND INSPECTION CAPS CLEANED

 BENDS AND HORIZONTAL STRETCHES IF PRESENT!

THE CLEANING FREQUENCY OF THE GENERATOR IS INDICATIVE! IT DEPENDS ON THE QUALITY OF THE PELLETS

USED AND FREQUENCY OF USE.

THESE OPERATIONS MAY HAVE TO BE PERFORMED MORE FREQUENTLY.

EVERY DAY

SCRAPERS:

The heat exchangers must only be cleaned when cold! Its cleaning

guarantees constant heat output over time. This maintenance

must be performed at least once a day. To do this, use the scrapers

positioned in the upper part of the generator, making

upward and

downward moments several times.

THE FOLLOWING IMAGES ARE ILLUSTRATIONS ONLY.

TO FIND OUT WHICH IS YOUR NEAREST AFTER-SALES CENTRE, CONTACT YOUR DEALER OR VISIT THE WEBSITE

WWW.LANORDICA-EXTRAFLAME.COM

THE IMAGES ARE ILLUSTRATIONS ONLY.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame Fiandra Idro Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame Fiandra Idro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info