Bedienungsanleitung Extraflame Sabry 5.0 (Seite 22 von 32) (Englisch)

811655

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

22 ENGLISH

FIRST LOAD

This function allows the auger to be lled, thus facilitating rst stove ignition phases, or in the event the pellet hopper is empty. With the

stove cold and "OFF", make sure the pellets have been introduced inside the hopper and activate the FIRST LOAD function, conrming by

pressing OK.

To stop the continuous loading, simply press 1 for 3 seconds.

CONTROLS PROCEDURE

Press key 6.

press key 3 until SETTINGS appears and conrm by pressing key 6.

Keep pressing key 3 until FIRST LOAD appears and conrm by pressing key 6.

Use keys 4-5 to enable "ON" / disable "OFF"

Press key 1 several times to conrm and exit the menu.

RESET

Allows the user to reset all editable values to the default values.

CONTROLS PROCEDURE

Press key 6.

Press key 3 until SETTINGS appears and conrm by pressing key 6.

Keep pressing 3 until RESET appears and conrm by pressing 6.

Use keys 4-5 to enable "ON" / disable "OFF"

Press key 1 several times to conrm and exit the menu.

DELTAT

This function allows the hysteresis thresholds to be set for stove ignition (DELTA-T ON) and switch-o (DELTA-T OFF), used as a room

temperature adjustment interval if not managed by an external thermostat.

The possible values for DELTAT go from: 0.5 - 5°C

CONTROLS PROCEDURE

Press key 6.

Press key 3 until SETTINGS appears and conrm by pressing key 6

Press key 3 until DELTAT appears and conrm by pressing key 6.

Use keys 4-5 to set the desired value.

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

EASY CONTROL

The function allows for two values to be set:

OFF (disabled - factory default)

ON (enabled)

Activation (EASY CONTROL = ON) is recommended in the event that there is an excessive formation of combustion residues in the ue during

operation at reduced power (see FLUE EXHAUST chapter).

Caution! It is advisable to activate the EASY CONTROL function under the supervision of a qualied technician.

CONTROLS PROCEDURE

Press key 6.

Press key 3 until SETTINGS appears and conrm by pressing key 6.

Keep pressing 3 until EASY CONTROL appears and conrm by pressing 6.

Use keys 4-5 to enable "ON" / disable "OFF"

Press key 1 several times to conrm and exit the menu.

CLEANING

This function facilitates the normal cleaning of the combustion chamber by activating the ue gas fan.

With the stove cold and switched "OFF", activate the CLEANING function.

The message "DO THE CLEANING" appears.

Open the re door and, using the poker supplied, clean the combustion chamber.

When cleaning is complete, close the door and end the function.

CONTROLS PROCEDURE

Press key 6

Press key 3 until SETTINGS appears and conrm by pressing 6.

Keep pressing key 3 until CLEANING appears and conrm by pressing 6.

Clean the combustion chamber using the poker supplied.

Press key 1 to end and wait for the main screen to reappear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame Sabry 5.0 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame Sabry 5.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info