696239
23
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
23ENGLISH
FRONT AIR
The menu for two operating modes of the front fan to be set: AUTO - COMFORT.
To set: OK > FRONT AIR >SET
DUCTING 1
The menu allows you to set three operating modes of ducting 1, and to adjust the temperature set if an NTC probe is connected to the input:
OFF - AUTO - COMFORT
To set: OK > DUCTING 1 > SET
To adjust the temperature: OK > DUCTING 1 > TEMPERATURE
DUCTING 2
The menu allows you to set three operating modes of ducting 1, and to adjust the temperature set if an NTC probe is connected to the input:
OFF - AUTO - COMFORT
To set: OK > DUCTING 2 > SET
To adjust the temperature: OK > DUCTING 2 > TEMPERATURE
EASY SETUP
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change while keeping
the quality of the pellet unchanged. Use the EASY SETUP function to change the calibration of the volumetric weight by increasing or
decreasing the preset values.
In the stove program, the available values from "- 3" to "+ 3"; all stoves are calibrated in production with the optimal value which is 0.
If you notice an excessive deposit on the burn pot, enter the EASY SETUP program and lower the value by one unit to “- 1”; then wait the
following day and if you do not see an improvement reduce it even more up to a maximum of “- 3”. If, on the other hand, it is necessary to
increase the calibration of the volumetric weight of the pellet, switch the factory value from "0" to "+ 1, + 2, + 3" as required.
To set: OK > EASY SETUP
EXCESSIVE PELLET DEPOSIT IN THE BURN POT NORMAL OPERATION MINIMUM PELLET DEPOSIT IN THE BURN POT
-3 -2 -1 0 +1 +2 +3
THIRD DECREASE
RANGE IF THE
FIRST TWO ARE
NOT ENOUGH
SECOND
DECREASE
RANGE IF THE
FIRST IS NOT
ENOUGH
FIRST DECREASE
RANGE (TEST FOR
1 DAY )
OPTIMAL FACTORY
VALUE
FIRST INCREASE
RANGE
SECOND
INCREASE RANGE
IF THE FIRST IS
NOT ENOUGH
THIRD INCREASE
RANGE IF THE
FIRST TWO ARE
NOT ENOUGH
N.B.: If this calibration does not solve the pellet deposit in the burn pot, please contact your local service centre.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Extraflame Terry plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Extraflame Terry plus

Extraflame Terry plus Bedienungsanleitung - Deutsch - 40 seiten

Extraflame Terry plus Bedienungsanleitung - Holländisch - 40 seiten

Extraflame Terry plus Bedienungsanleitung - Französisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info