Bedienungsanleitung Fagor CAT 44NG (Seite 24 von 104) (Englisch, Französisch, Portugiesisch, Spanisch)

485594

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

If a foreign body is impossible to

remove, take off the grinding ring.

To do this, proceed as follows (Fig. 21):

1. Push the Release catch for removing

grinding ring (Fig. 2, U) forward toward

the centre of the grinder.

2. Keep it in this position and turn the

Lever for setting grinding texture (Fig.

2, V) approximately one full turn

clockwise until it comes up against the

stop.

You can continue to turn the Lever for

setting grinding texture (Fig. 2, V) only

if the Release catch for removing

grinding ring (Fig. 2, U) is pressed.

Now release the grinding ring (Fig. 22)

and remove the foreign body or bodies.

Caution! Risk of injury from the spin-

ning grinder. Never switch the coffee

machine on, when you are working on

the grinder. This can lead to severe

injuries. Before starting work, ensure

that the machine is unplugged from

the mains socket.

When refitting the grinding ring,

ensure that both catches on the grind-

ing ring holder engage in the corre-

sponding slots (Fig. 22).

Failure to do this can lead to damage

to the grinder.

Turn the Lever for setting grinding tex-

ture (Fig. 2, V) approximately one full

turn anticlockwise until it comes up

against the stop.

Set the bean container in place at the

„UnlockContainer“ position and

turn it back to the „Coffee Beans“ posi-

tion .

Add a small quantity of coffee beans,

and test the proper operation of the

grinder by making a cup of coffee. The

first time the grinder is used, or after

cleaning, less ground coffee will enter

the coffee-making unit, because the

channel first has to be filled. This can

influence the first cup of coffee.

13.5 Cleaning the Coffee-making Unit

We recommend cleaning the brewing

unit monthly. More frequent cleaning

is recommended if the machine is

used more intensively. If your

appliance is left unused for longer

periods (e.g. holidays), it is necessary

to empty the coffee grounds contai-

ner and the water reservoir.

Before reconnecting clean the

brewing unit thoroughly.

Removing the brewing unit:

Switch off the appliance with button h

“ON/OFF”. The appliance carries out a

rinsing process and asks you subse-

quently to empty the coffee grounds

container.

Pull the coffee grounds container out

of the appliance, empty and clean it.

Fig. 23

Press the unlocking button on the

service door. Fig. 24

The service door opens to the front.

Fig. 25

The brewing unit is located behind

the service door. Fig. 26

Caution! Risk of burning through

hot brewing unit! If you have just

dispensed coffee, then the dispen-

ser could still be hot!

5/6 Remove the brewing unit by

inserting your index finger through

the ring of the coffee dispenser at the

front of the brewing unit and pull the

brewing unit straight forwards.

Prevent the brewing unit with the

other hand from falling. Fig. 27, 28.

Cleaning the brewing unit /

inserting the brewing unit

The brewing unit is open and the

ejection lever folds down. Turn the

brewing unit around. Both stainless

steel sieves are easily accessible now.

Fig. 29.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor CAT 44NG Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info