Bedienungsanleitung Fagor FET-5112 (Seite 18 von 40) (Deutsch, Englisch, Französisch, Italienisch)

554737

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• CLEANING THE PUMP FILTER

This lter collects the small objects you may have inadvertently left in your

clothes and prevents them from disrupting the pump’s operation.

To clean the lter, proceed as follows:

—

Open the drum doors. At the back of the drum, you will see a plastic

component (Diagram D15)

—

Release this (Diagram D16).

To do this:

- Insert a rod (a pencil or a screwdriver, for example) into the hole in the

component .

- Press down vertically with the rod, while pushing the component over

to the right until it is released from its housing .

—

Remove the component

—

Turn the drum slightly towards the front of the machine, with the doors

open (Diagram D17)

You can access the pump lter through the openings freed by removing

the plastic component .

—

Remove the lter from its housing (Diagram D17)

—

Remove the various objects it may have in it

—

Rinse it under the tap (Diagram D18)

—

Re-insert it, pushing it rmly into its housing after checking that the

housing is clean

—

Re-insert the plastic component , ensuring that it is positioned correctly

in the openings at the bottom of the drum and pushing it to the left until it is

fully engaged

(Diagram D19).

• CLEANING THE MACHINE

Important:

To clean the casing, the control panel and all the plastic parts

in general, use a sponge or a soft cloth dampened only with water

and liquid soap.

In all cases, do not use:

—

Abrasive powders

—

Metal or plastic sponges

—

Alcohol-based products (alcohol, thinners, etc.)

• CARE OF THE INTERNAL COMPONENTS

To ensure better hygiene, we recommend that you:

—

Leave the lid open for a short time after washing.

—

Clean the plastic and rubber access components to the tank pproximately

once a month using a slightly chlorinated product. Run a rinsing cycle to

remove any residue of this product.

—

Run a washing cycle at 90°C at least once a month.

• CLEANING THE PRODUCTS’ BOX

Clean the products’ box regularly.

To do this:

—

Press the bosses on each side of the box simultaneously to extract it

from its housing (Diagram D20)

—

Remove the siphons from the rear of the box and separate the box

from its front cover (Diagram D21)

—

Rinse everything under the tap (taking care to empty any excess water

remaining inside the box)

—

Ret all the box’ components, ensuring that the box section itself is

properly clipped into the cover and then re-insert the complete assembly

into its location under the machine’s lid.

• PERIODIC CHECKS

To avoid any water damage, we recommend that you regularly check the

condition of the water and drain hoses. If you notice the slightest cracking,

do not hesitate to replace the hoses with identical ones available from

the manufacturer or his After-Sales Service. For how to replace the water

supply hose, please refer to the section «CONNECTING TO THE COLD

WATER SUPPLY».

• REPLACING THE POWER SUPPLY CABLE

Warning:

For your safety, the power cable and, depending on the model,

the complete electric box and its associated cable must only be

replaced by the manufacturer’s After-Sales Service or a qualied

electrician.

5 / MAINTAINING YOUR MACHINEEN

D E

D 15

D 16

D 17 D 18

D 19

D 20

D 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor FET-5112 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info