Bedienungsanleitung Falcon De Luxe 1092 Continental (Seite 27 von 56) (Deutsch, Englisch)

500340

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

SERVICING  WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

17 To Adjust the Oven Door Catch Keeper

a) Open the oven door and slacken the locknut at the

keeper base.

b) Adjust the keeper inward or outward as required, until

the desired door operation is obtained.

c) Re-tighten the locknut.

18 To Remove the Hotplate Spark Generator

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the

appliance rear. Remove the ﬁ xings that secure the cover

and lift it clear.

b) Undo the terminal connections noting their positions.

c) Undo the ﬁ xings that secure the spark generator and

remove the device.

19 To Remove the Hotplate Electrode Leads

Disconnect from the electricity supply.

Pull the unit forward to access the rear of the appliance.

a) Remove the pan supports, hotplate accessories and

burner heads.

b) Remove the hotplate as detailed in Section 2.

c) Remove the cover box and disconnect all HT leads at the

generator.

d) Remove the lower back panel and disconnect the lead at

the electrode.

e) Pull the sleeved bundle of HT leads up through the rear

upright.

f) Pull the appropriate lead from the sleeve and push in the

replacement.

g) Replace the leads in the rear upright.

h) Re-connect the leads at the generator and oven

electrode.

j) Re-assemble in reverse order and check ignition.

20 To Remove Oven Inner Back

a) Open the oven door. For the LH oven unscrew the 2

thermostat phial ﬁ xing screws. Remove the ﬁ xings that

secure the inner back to the oven rear.

b) Lift the removable panel away.

c) Re-assemble in reverse order. Ensure that the retaining

ﬁ xings are fully tightened.

21 To Replace an Oven Fan

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the rear

of the appliance. Remove the ﬁ xings that secure the cover

and lift it clear.

b) Remove the fan wiring, noting the connection positions.

c) Remove the inner back as detailed in Section 20.

d) Hold the fan blades and undo the centre nut (LH thread),

brass washers, fan blade and circlip.

e) Undo the ﬁ xings that retain the fan and remove it from

the cavity rear.

f) Fit the replacement and re-assemble parts in reverse

order. Check that the oven operates satisfactorily.

22 To Remove an Oven fan Element

Disconnect the appliance from the electricity supply.

a) Remove oven inner back (see 20).

b) Remove 2 screws from the top of the element and 1 from

the bottom of the element in side the oven.

c) Lift element out carefully, disconnect the terminals

connected to the element noting their positions. If it

is not possible to disconnect the leads in this way, pull

cooker forward to gain access to the rear, remove screws

securing the electric cover to the back sheet and remove

cover and disconnect the terminals from the rear.

d) Fit new element, and reassemble in reverse order.

e) Check that the oven operates correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon De Luxe 1092 Continental Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falcon De Luxe 1092 Continental

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info