Bedienungsanleitung Falcon Excel 110 (Seite 54 von 60) (Deutsch, Englisch)

71518

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

WARNING  SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

Reassemble in reverse order. When replacing leads refer to the

wiring diagram. Check operation of timer.

7. To Remove an oven Thermostat

Disconnect from the electricity supply.

Remove control panel and hotplate (see 1 & 2). Open oven door.

Remove oven furniture and slide out oven roof liner if ﬁ tted. Pull

cooker forward to gain access to the cover box at the rear of the

cooker. Remove the screws securing the cover and lift clear. The

oven thermostat capillary is clamped to the oven back sheet with

an earthing plate. Remove the screws and plate.

thermostat capillary

earthing plate

Left Hand Main oven

Remove the two screws holding the thermostat phial to the oven

fan cover at the rear of the oven.

Right hand Main oven and Slow Cook oven

Remove thermostat phial cover (2 screws). Unclip the thermostat

phial from the clips on the oven back.

Slow cook oven thermostat phial cover.

Feed the thermostat capillary out of the oven. Disconnect

wiring from thermostat. Remove 2 screws holding thermostat to

mounting panel. Fit new thermostat and reassemble in reverse

order. Ensure that the phial is clipped to the oven back with the

phial centrally positioned between the clips.

Remember to reﬁ t the earthing plate.

Check operation of thermostat.

8. To Change the Grill or Ceramic hob Controller

Disconnect from the electricity supply.

Remove the control panel and hotplate (see 1 & 2). Disconnect

wiring from controller. Remove 2 screws holding controller to

mounting panel. Fit new controller and reassemble in reverse

order. Check for correct operation.

BEFORE SERVICING ANY GAS CARRYING COMPONENTS TURN OFF

GAS SUPPLY.

9. To Change a Hotplate Tap

Disconnect from the electricity supply.

Remove the control panel and hotplate (see 1 & 2).

Unplug the FSD lead from the rear of the tap. Undo compression

ﬁ tting at the rear of the tap. Remove the ﬁ xings that secure the

tap to the gas rail. Disconnect the ignition switch wiring.

Remove the tap. Remove and discard the gasket seal. Fit new

gasket seal to replacement tap. Re-assemble in reverse order.

Check the appliance is gas sound. Check hotplate ignition.

10. To Change Hotplate Burner Injector

Remove burner cap and head. Remove old jet. Fit new injector.

Reassemble in reverse order. Check appliance is gas sound.

11. To Change Hotplate Burner Electrode

Lift oﬀ pan supports, remove burner cap. Remove the screw

holding the electrode. Pull electrode vertically up suﬃ ciently

to grip the lead between thumb and foreﬁ nger. Pull oﬀ the

electrode, but keep hold of the lead. Fit new electrode to the

lead. Fix electrode in burner with screw. Replace burner cap.

Check the burner ignition. Replace pan supports.

12 To Remove or Change a Hotplate Burner.

Remove the hotplate tray (see 2).

The burners except the right hand wok burner are mounted on

support struts. For these burners, disconnect the burner feed

pipes at the burner. Remove the screws at the front and rear

holding the support stru ts. Lift the strut and burners clear. The

burners are ﬁ xed to the support struts with 2 screws. Remove the

appropriate burner and ﬁ t the new one. Reassemble in reverse

order. Check burner operation is satisfactory.

RH Wok burner

Disconnect the burner feed pipes at the burner. Fit the new

one and reassemble in reverse order. Check burner operation is

satisfactory.

13. To Remove an Oven Door

Open the oven door. Loosen the two top hinge screws.

Support the weight of the door and remove the screw nearest

the hinge pin. Swing the hinge up and away from the hinge pin

on the door.

Lift the door away from the bottom hinge.

Re-assemble in reverse order. When replacing the door ensure

that the nylon hinge bush is in position between the hinge pin

and the hinge bracket at the both the bottom and top.

14. To Change Oven Door Outer Panel

Move the cooker forward

to gain access to the sides.

Open the oven door

slightly and remove the

front panel ﬁ xing screws

from the door sides (two

each side).

Carefully lift oﬀ the outer door panel.

Remove door handle from panel by unscrewing 2 retaining nuts.

Fit door handle to new panel

Fit panel to door. Reassemble in reverse order.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon Excel 110 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falcon Excel 110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info