Bedienungsanleitung Falcon Toledo 90 (Seite 34 von 40) (Englisch)

659394

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have nished.

3 Controls

3.1. To Replace the Ignition or Light Switch

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the control panel (see 1.1).

Note: The old switch may be destroyed during removal.

Remove the old switch from its bezel by gripping the

switch body behind the control panel and twisting

sharply. Remove the switch bezel by folding back the

locking wings and pushing forward.

To t the new bezel to the control panel: rst line up the

raised key on its body with the cut-out in the control

panel and push it in from the front.

Assemble the new switch to the bezel by lining up the

key sections and pushing home. Fit the new button by

pushing in from the front.

Replace the control panel in the reverse order and test

for correct operation.

3.2 To Replace the Clock

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the control panel (see 1.1). Pull o the timer

control buttons.

Undo the timer xing screws and remove the timer/

mounting bracket assembly from the control panel.

Remove the timer from its mounting bracket by

depressing the plastic lugs on the timer case, and at the

same time pulling the unit forward.

Reassemble in reverse order. When replacing the leads,

refer to the wiring diagram. Check the operation of the

timer.

3.3 To Change the Ignition Generator

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Pull the cooker forwards to gain access to the cover box

at the rear of the cooker. Remove the screws securing

the cover and lift clear. Pull o all the leads to the

generator noting their positions. Slacken the 2 screws

holding generator to cooker and remove the generator.

Fit the new generator to the cooker and replace the

leads. Refer to the wiring diagram and reassemble in

reverse order. Check ignition performance.

4 Grill

4.1 To Replace the Grill Controller

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the control panel and hotplate (see 1.1 & 2.1).

Disconnect the wiring from controller. Remove the

2screws holding the controller to the mounting panel.

Fit the new controller and reassemble in the reverse

order. Check for correct operation.

4.2 To Replace the Grill Element

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the grill pan from the grill chamber. From inside

the grill compartment, undo the 2 screws and washers

and remove the enamelled front shield from the grill

roof. Remove 2 screws and washers securing the grill

element front support. Remove the screws from the grill

elements.

Carefully lift the elements out and disconnect the leads

from the element terminals, noting their position.

If it is not possible to disconnect the leads in this way,

pull cooker forwards to gain access to the rear.

Remove the screws securing the electric cover to the

back sheet, and then remove cover and disconnect the

terminals from the rear.

Fit the new elements and reassemble in reverse order.

Check the operation of the grill.

5 Ovens

5.1 To Remove the Oven Inner Back

Main Oven

Open the main oven door. Remove the 4 screws and

washers securing the inner back to the back of the oven

(Fig.9-4). Carefully lift away the inner back.

Reassemble in reverse order, making sure that you fully

tighten the 4 screws and washers.

Tall Oven

Open the tall oven door and remove the 2 screws and

washers securing the inner back to the back of the oven.

Carefully lift away the inner back.

Reassemble in reverse order.

Check the door for correct operation.

5.2 To Change the Oven Fan

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Pull the cooker forward to gain access to the rear.

Remove the screws securing the electric cover to the

back sheet and remove the cover. Disconnect the

3terminals connected to the fan, noting their position.

Remove the oven inner back (see 5.1). Hold the fan

blade and remove the centre nut (left-hand thread),

2brass washers, fan blade and circlip. Unscrew the fan

retaining nuts and washers (3 o each) and lift the fan

away from the rear of the cooker.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon Toledo 90 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info