8.3.
Print Out of System Data
The following system data can be printed out:
• Navigation log ON/OFF and (by ON) trigger parameters
• programmed reception channels and their
• mode
• message storage
• message direct print out
• programmed timer status 1 to max. 9
• unit type and version number
• name of owner and ship if entered
To activate the print out:
• press <DOWN> and spring to position 7 - <STATUS>
• press <ENTER> to commence printing
NAVTEX parameters can be printed out separately under menu
position 3 - NAVTEX.
Data storage:
All stored data, such as system parameters, receiver parameters,
timer status, stored messages etc. remain stored for at least 3
months, and under optimal conditions up to 12 months. This is
possible because of the integrated NiCd battery, which is
continually charged when the unit is in operation.
It is recommended that in a case, where the unit should be out of
operation for a longer period, that you print out the system data
and the NAVTEX parameters and file them. Should their be a loss
of data, you can re-enter the old data from the print out.
