9. Installation
9.1. Delivery contents
Please check, that the following contents, necessary for the
installation of the FMD15 are supplied:
• 1 pc pre-assembled power connection cable
• 2 pcs universal mounting brackets
• 4 pcs self holding spacers
• 4 pcs lock washers M5
• 4 pcs t thumbscrews M5
• 1 pc spare fuse 2A slow-blow 5 x 20mm
• 1 pc fuse, 300mA slow-blow 5 x 20mm (active antenna)
• 1 pc mounting hole template
• 1 pc instruction manual
9.2. Installation of unit
The two universal mounting brackets allow:
• desk top fitting
• wall fitting
Additionally the FMD15 can be fitted at 4 different angles. Screw
the brackets with the 4 screws to the wall or ceiling, using the
adhesive template in order to bore the holes in the correct
positions.
On each side of the FMD15, there are two M5 threaded holes for
fitting at the required angle with the thumb screws. Beforehand,
press the self-holding spacers into the selected holes. These keep
the brackets at a defined distance from the casing and has been
accounted for in the template.
Before boring the holes, we recommend you to attach the
brackets, power supply and antenna cables, and select the final
mounting position.
Using the template, bore the holes in the exact positions and
screw on the brackets. Hold the FMD15 at the selected angle and
attach with the thumb screws into the holes with the spacers.
