2.1. Entering Frequencies
x To activate the receiver press the F1<2182> key
(should no other input be made, the receiver is tuned
to the international emergency frequency 2182 kHz).
x Press the <FREQ> key
x Enter the frequency in kHz with the numeral keys (correct errors
with <CLEAR> key).
x Control that the input is correct and <ENTER>.
x For fine-tuning of the frequency and input of decimal point, use
the cursors <UP> and <DOWN>.
The frequency entered will now be displayed.
2.2. Selecting Reception Mode
The receiver is provided with the following modes:
x AM for the reception of amplitude modulated radio stations
(e.g. BBC 4, Valentia, Athens etc.).
x CW for the reception of A1 signals ( Morse code from IAR,
Roma etc.).
x FSK (frequency shifting key) for RTTY (teletype) and SITOR-
NEC transmissions.
x USB (upper side band) for the reception of single side band
(SSB) modulated signals.
See also chapter 3 – Page 3-1
For the reception of LSB (lower side band) use the FSK
mode.
While in Standby mode, or before the frequency input,
the basic mode is USB.
By pressing the <MODE> key the mode rotates (toggles)
from USB to AM then CW and finally FSK before returning
to USB.
The display will show the selected mode.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
