9. Installation
9.1. Delivery Contents
As well as the FMD55 the following material necessary for the
mounting are supplies in the packing:
x 1 pc pre-assembled power connection cable
x 2 pcs universal mounting brackets
x 4 pcs self holding spacers
x 4 pcs lock washers M5
x 4 pcs thumb screws M5
x 4 pcs caps for unused screw-holes
x 1 pc spare fuse 2A slow-blow 5 x 20mm
x 1 pc fuse, 500mA slow-blow 5 x 20mm (active
antenna)
x 1 pc mounting hole template
x 1 pc instruction manual
x 1 pc screwdriver 2mm for contrast adjustment
9.2. Installation of the Unit
The two universal mounting brackets allow:
x Desk top fitting
x wall fitting
x ceiling fitting
Additionally the FMD55 can be fitted at 4 different angles. Screw
the brackets with the 4 screws to the wall or ceiling, using the
adhesive template in order to bore the holes in the correct
positions.
On each side of the FMD55, there are four M5 threaded holes for
fitting at the required angle with the thumbscrews. Beforehand,
press the self-holding spacers into the selected holes. These keep
the brackets at a defined distance from the casing and has
been accounted for in the template.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
