Bedienungsanleitung Felisatti HF12.5 (Seite 4 von 24) (Deutsch, Englisch, Französisch, Spanisch)

502477

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

4 - GB

those recommended in the instruction manual, may present

a risk of personal injury. Wheel intended for larger power tool

is not suitable for the higher speed of a smaller tool and may

burst.

Check before Use

1. Connection to Power Supply

2. Extension Cord

Use an extension cord if the

distance to the power source

requires its use. Extension cord

must be of appropriate thickness

and length for the supply of

electric current. Too thin or too long cord will cause voltage to

drop reducing the motor power. Use it as short as possible.

If the cord is damaged, have it repaired or replaced at A/S

center immediately.

3. Maintenance and Checking of Work Area

Work area must be checked using CAUTIONs in this manual

to ensure it provides appropriate environment.

4. Power Supply Check

Make sure that the power supply complies the requirements

described in the name plate on the Electric Hammer Drill.

5. Switch Status Check

if the power plug is connected when the power switch is

in ON position, sudden rotation of the moving parts of the

Electric Hammer Drill may cause accident.

Check if the switch lever returns to its original position when

it is pushed and pulled.

An explanation of any symbols or pictograms marked on

the tool relevant to safe use;

Technical Data and List of Contents

1. Technical Data

parameter HF12,5/1050

Rated Voltage, V~ 230

Rated frequency, Hz 50

Motor Protection-type Single-

phase Commutator

Rated Input , W 1050

No-load speed(bpm), /min 3500

Impact Energy, J 12,5

Weight (Without cord, side

handle), kg

5,4

Protection Class II

Tool holder system SDS Max

Typical A-weighted sound power

level(LWA), dB(A)

100

Typical A-weighted emission

sound pressure level(LPA),

dB(A)

Triaxial vibration value:chiseling

(ah)(vibration vector sum), m/сІ

11,5

2. List of Contents

Plastic Box

Grease tube

Instruction Manual

1. Description of Functions

The overall look of the machine shown in Fig.1.

1 – Retainer SDS-max®

2 - Selector

3 - Jacket

4 - Crank Case Cover(B)

5 - Grease Cover

6 - Crank Case Cover(A)

7 - Switch

8 - Handle

9 - End Cover

10 - Housing

11 - Gear Cover

12 - Crank Case

13 - Сap

2. Applications

Demolition of concrete Ramming, grooving, cutting, detach-

ing, angle forming, grooving on pebble road [Examples of ap-

plication] Cooling/heating constructions, piping/wiring works,

sanitary equipment installations, installation of machineries,

water supply/sewage works, interior works, port facilities

engineering, other engineering, equipment installation and

repair works.

Mounting/Dismounting of Tools and Operating Method

1. Mounting / Dismounting the Tools (Fig.2)

To mount the tool, push the tool in while pushing the retainer

backward in the direction of the arrow. To dismount, pull out

the tool while pushing the retainer again backward in the di-

rection of the arrow.

2. Mounting the Jacket (Fig.3)

The Jacket of both HF12,5/1050 Hammers can be mounted

by turning it 180°. Mount it the way user feels most comfort-

able.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti HF12.5 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info