2) Select the desired ID number with the DATA WHEEL. The range of values
is 17—32 and Omni (“On”).
The default setting is Omni (“On”). In Omni mode, the amplifier receives SysEx
messages from all Cyber-Deluxe™ amplifier family devices on the network. In
Omni mode, if the amplifier transmits a SysEx message, then any receiving
Cyber-Deluxe™ amplifier will respond to the SysEx message regardless of its
own internal SysEx ID setting. (ID# 33 is used to accomplish this.) Select a
specific SysEx device ID# (17–32) if you wish to limit SysEx message response
only to Cyber–Deluxe™ amplifier family devices set to the same number.
Continuous Controller Echo
This menu item is used to enable / disable the retransmission of MIDI data
received by the Cyber–Deluxe™ amplifier.
1) Press UTILITY repeatedly until “Ec” is displayed (the display will then
alternate between “Ec” and the current setting).
2) Select Off (“OF”) or On with the DATA WHEEL.
The default setting is Off (“OF”). Only SysEx and channel messages
originating in the amplifier will still be transmitted through MIDI OUT.
Additionally, if set to On, all Continuous Controller channel messages
received at MIDI IN will be echoed (retransmitted) through MIDI OUT.
Memory Protect
This menu item is used to prevent your rewritable presets from being
overwritten.
1) Press UTILITY repeatedly until “Pt” is displayed (the display will then
alternate between “Pt” and the current setting).
2) Select Off (“OF”) or On with the DATA WHEEL.
The default setting is Off (“OF”). When Memory Protect is On, the amp will
remind you by displaying “no” momentarily if SAVE is pressed. Memory
Protect also discards MIDI All Preset Dumps to the amplifier and displays
“no” until EXIT is pressed. CAUTION: Memory Protect does not prevent a
Factory Presets Restore from overwriting all of your rewritable presets.
Factory Presets Restore
CAUTION: This menu item is used to restore the Cyber–Deluxe™ amplifier
to the original factory settings, including all rewritable presets and Utility
settings—even if Memory Protect is ON!
1) Press UTILITY repeatedly until “rP” is displayed.
2) To execute the restore, press the TAP button.
%
A Factory Presets Restore operation
will take several seconds to complete.
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
29
Advanced Functions
