Bedienungsanleitung Ferm AGM1049 - FAG-125-500 (Seite 5 von 16) (Englisch)

763248

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Ferm

ANGLE GRINDER

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for many

years to come.

Safety warnings

WARNING

Read the enclosed safety warnings, the

additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result

in electric shock, fire and/or serious

injury. Keep the safety warnings and the

instructions for future reference.

The following symbols are used in the user manual

or on the product:

Risk of personal injury.

Risk of electric shock.

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Risk of flying objects. Keep bystanders

away from the work area.

Wear ear and eye protection

Wear protective gloves

Do not press the spindle lock button while

the motor is running.

Risk of fire.

Double insulated.

Additional safety warnings for angle grinders

The machine has been designed for use as a •

grinder or cut-off machine. The machine is not

suitable for operations such as sanding, wire

brushing, polishing, etc. Risk of personal

injury.

Do not use accessories which are not •

specifically designed and recommended by

the manufacturer. Risk of personal injury.

Inspect the machine and the accessories •

before each use. Do not use accessories

which are bent, cracked, or otherwise

damaged. If the machine or one of the

accessories is dropped, inspect the machine

or the accessory for damage. If necessary,

replace the accessory.

Let the machine run at no load in a safe area •

after mounting the accessories. If the machine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

Make sure that the maximum speed for the •

grinding disc is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

Only use grinding discs with the correct •

thickness and outside diameter. Refer to the

rating plate on the machine.

Make sure that spindle diameter of grinding •

discs, spacers, tension nuts, etc. correspond

to the diameter of the spindle on the machine.

Make sure that the grinding disc is properly •

mounted. Do not use adapters or other aids to

mount grinding discs with another spindle

diameter.

Only use grinding discs that are recommended •

by the manufacturer. Only use guards that are

specifically designed for the grinding disc.

Only use grinding discs that are suitable for •

the application. For example: do not grind with

the side of a cut-off disc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm AGM1049 - FAG-125-500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info