Bedienungsanleitung Ferm AGM1089P (Seite 8 von 16) (Englisch)

763843

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

• Do not use the machine near flammable

materials. Risk of fire.

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Do not work metal with a magnesium content

of more than 80%.

• Beware that the grinding disc continues to

rotate for a short period after switching off the

machine. Do not attempt to bring the grinding

disc to a standstill yourself.

• Never put the machine down on a table or a

workbench before it has been switched off.

• Regularly clean the ventilation slots.

Risk of electric shock.

Kickback is a sudden reaction to a pinched,

bound or twisted grinding disc, which causes

the machine to lift up and out of the workpiece

towards the user. If the grinding disc is pinched

or bound tightly by the cut, the grinding disc jams

and the machine is rapidly driven back towards

the user. If the grinding disc is twisted in the cut,

the back edge of the grinding disc can dig into

the top surface of the workpiece, which causes

the grinding disc to climb out of the cut and jump

back towards the user.

Kickback is the result of incorrect use of the

machine and/or incorrect operating procedures

or conditions. Kickback can be avoided by taking

proper precautions:

• Firmly hold the machine with both hands.

Position your arms to resist kickback forces.

Position your body to either side of the

grinding disc, but not in line with the grinding

disc. Kickback can cause the grinding disc

to jump backwards. If proper precautions are

taken, kickback forces can be controlled by

the user.

• Be extra careful when using the machine on

corners, sharp edges, etc. Make sure that the

grinding disc does not become jammed.

Risk of kickback.

• If the grinding disc jams or if you interrupt a

cut for any reason, release the on/off switch

and hold the machine motionless in the

material until the grinding disc comes to a

complete standstill. Never attempt to remove

the machine from the workpiece or pull the

machine backward while the grinding disc is in

motion. Risk of kickback.

• Do not use blunt or damaged grinding discs.

Unsharpened or incorrectly mounted grinding

discs produce narrow cuts, which causes

excessive friction and kickback and increases

the risk of the grinding discs becoming

jammed.

• Do not use toothed saw blades. Do not use

woodcarving blades for saw chains.

Risk of personal injury.

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use a

extension cable reel, always fully unroll the

cable.

Technical data

AGM1089P

Mains voltage 220-240 V~

Mains frequency 50 Hz

Power input 800 W

No-load speed 11.000/min-1

Grinding disc

Diameter 100 mm

Bore 16 mm

Spindle thread M10

Weight 1.9 kg

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Wear hearing protection.

DESCRIPTION (FIG. A)

Your angle grinder has been designed for grinding

and cutting masonry and steel.

1. On/off switch

2. Spindle lock button

3. Spindle

4. Guard

5. Main grip

6. Auxiliary grip

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm AGM1089P Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info