Bedienungsanleitung Ferm AGM1102 (Seite 5 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

764188

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ANGLE GRINDER

AGM1102

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

SAFETY WARNINGS

WARNING

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result

in electric shock, fire and/or serious

injury. Keep the safety warnings and

the instructions for future reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Risk of personal injury.

Risk of electric shock.

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Risk of flying objects. Keep bystanders

away from the work area.

Wear safety goggles.

Wear hearing protection.

Wear safety gloves.

Do not press the spindle lock button

while the motor is running.

Risk of fire.

Double insulated.

Do not dispose of the product in

unsuitable containers.

The product is in accordance with the

applicable safety standards in the

European directives.

Additional safety warnings for angle grinders

This machine is suitable for light work.

Do not overload the machine.

• The machine has been designed for use as

a grinder or cut-off machine. The machine is

not suitable for operations such as sanding,

wire brushing, polishing, etc. Risk of personal

injury.

• Do not use accessories which are not

specifically designed and recommended by

the manufacturer. Risk of personal injury.

• Inspect the machine and the accessories

before each use. Do not use accessories

which are bent, cracked, or otherwise

damaged. If the machine or one of the

accessories is dropped, inspect the machine

or the accessory for damage. If necessary,

replace the accessory.

• Let the machine run at no load in a safe area

after mounting the accessories. If the machine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

• Make sure that the maximum speed for the

grinding disc is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Only use grinding discs with the correct

thickness and outside diameter. Refer to the

rating plate on the machine.

• Make sure that spindle diameter of grinding

discs, spacers, tension nuts, etc. correspond

to the diameter of the spindle on the machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm AGM1102 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info