Bedienungsanleitung Ferm BGM1022 (Seite 6 von 88) (Alle Sprachen)

762289

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

2. MACHINE INFORMATION

Intended use

This machine combines all the advantages of a

horizontal and a vertical belt sander with those of

a disc sander. Its sturdy construction in cast iron

and steel makes the machine suitable for every

sanding job.

Technical specifications

Voltage 230-240 V, 50 Hz

Power input 350W

S2= 30 min*

No load speed sander belt 292m/min

No load speed sander disc 1450 /min

Sanding belt size 915 X 100 mm

Sanding disc size Ø 150 mm

Weight 12.2 kg

Lpa (Sound pressure level) 77+3 dB(A)

Lwa (Sound power level) 90+3 dB(A)

*S2= Maximum period of operation with a

capacity of 350 W

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with

a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Description

The numbers in the text refer to the diagrams on

pages 2-5.

1. Machine frame

2. Motor

3. Roller stop and parallel stop

4. Clamping handle

5. Transport roller

6. Sanding belt

7 On/off switch

8. Fence

9. Drive roller

10. Aluminium disc

11. Sanding disc

12. Working table

13. Mitre scale

14. Supporting arm

15. Connection vacuum cleaner

3.ASSEMBLY

Installation

Avoid the use of long extension cables. Do not

forget to leave enough space around the machine

for the workpieces to be sanded.

Assembly

• Put the machine frame on its head and press

the four rubber stops into the foot of the frame.

• Machine frame, aluminium disc (10) and work

plate (12) are supplied in separate packaging.

• Push the aluminium disc on the shaft and

fasten the disc with the socket bolt in the side

of the disc (Fig.B - D).

• Place the work plate (12) with the shaft in the

machine frame and secure the work plate

with the bolt in the side of the machine frame.

Check with a 90° sash angle on the work plate

and against the sanding disc if the angle is

exactly 90° (Fig.E).

• If necessary, adjust this angle with the

calibration indicator.

• The mitre scale (13), which is also supplied

separately, can be placed on the work plate

(12). With the use of this mitre scale the angle

of grinding can be determined precisely.

• The fence (8) for the belt sander can be placed

behind the uppermost bolt of the V-belt guard.

In this way the workpiece can be held firmly

against the belt, without great hazards.

• Attach the vacuum cleaner to the vacuum

cleaner connections (15)

To prevent the workpiece or your fingers

from getting caught between the work

plate (12) and the sanding disc (11), the

space between work plate (12) and

sanding disc (11) must not exceed 1.6 mm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BGM1022 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info