38 Ferm
GB
Ferm 03
BELT SANDER
The numbers in the following text refer to the
drawing on page 2.
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator’s guide and other enclosed
documentation with the machine.
Product information
The belt sander is the perfect tool to sand wood
and to grind iron, plastic or similar materials.
The belt sander must be used for the rough work,
for the normal sanding work an orbital sander
must be used.
Contents
1. Technical specifications
2. Safety instructions
3. Operation
4. Maintenance
1. TECHNICAL
SPECIFICATIONS
Machinedata
Contents of packing
1 Belt sander
3 Sanding belts
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Warranty card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. A
1. On/off switch
2. Front handle
3. Rear handle
4. Blocking switch
5. Dust collection opening
6 Adjusting knob
7. Sanding belt fastener
8. Front belt roller
9. Direction indicator
10. Drive belt cover
11. Dust bag
2. SAFETY INSTRUCTIONS
In this manual and/or on the machine the
following symbols are used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Wear a dust mask
Special safety instructions
• Contact or inhalation of dust coming free
during sanding (e.g. lead painted surfaces,
woods and metals), can endanger the health
of operator and bystanders. Always wear
appropriate personal equipment as a dust
mask and use the dust bag during sanding.
• The sanding machine is not suitable for wet
sanding.
• Check if the switch is not in position “ON”,
before you connect the mains plug to the
mains voltage.
• Keep the mains lead always away from
moving parts of the tools.
• Use safety glasses, especially when you sand
above your head.
• Do not bring pressure to your machine, this
will only delay the sanding.
Voltage 230 V~
Frequency 50 Hz
Power input 800 W
No load sander paper speed 380 m/min
Sanding belt size 75 x 533 mm
Sanding pad size 75 x 160 mm
Weight 3.5 kg
Lpa (Sound pressure) 93.5 dB(A)
Lwa (Sound power level) 106.5 dB(A)
Vibration value 2.1 m/s2
GB
