Bedienungsanleitung Ferm CDM1112S (Seite 8 von 152) (Alle Sprachen)

632674

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Inserting the battery into the machine

Fig. B

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

 

 

machine as shown in Fig. B.

 

into place.

Checking the battery charging status

Fig. C

The included battery is delivered in partly

charged condition.

 

the battery into the machine.

 



 

the charge level, the more lights that burn, the

more charge the battery has left.

 

the battery is empty and must be charged

immediately.

Charging the battery (with the charger)

Fig. D

 

 



 

slot.

 

and wait for a while. The LED indicator on



charger status.

LED indicator (6)

Fig.D



indicates the status of the charging process:

LED color LED status Charger status

Off Off No power or no battery is inserted

Green Blinking Battery charging in progress

Green On

Battery charging finished, battery

fully charged

Red Blinking

The battery is not inserted correctly

into the charger or, the battery is

defective and needs to be replaced

Red On

Battery is too hot, charging

progress is on hold. Charging will

start automatically after the battery

has cooled down.

 

to 45 minutes.

 

charger plug from the outlet and remove the

battery from the charger.

 

on the machine.

Lithium-Ion cells can be stored for a long

period without losing much of their

charge. When the machine is not being

used over a longer period of time it is

best to store the battery in charged

condition.

Fitting and removing drills or screwdriver bits

Fig. E

Always remove the battery before

mounting an accessory.



screwdriver bits with round shaft as well as

hexagonal shaft.

 

 

with your other hand in clockwise direction

until it is opened far enough for the bit to slide

in.

 

 



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1112S Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info