Bedienungsanleitung Ferm CDM1121P (Seite 7 von 144) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

763849

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Sound power level LWA

77.23 dB(A)

K=3 dB(A) 77.40 dB(A)

K=3 dB(A)

Hand-arm vibration ah

(screwdriving without impact) 0.627m/s2

K=1.5 m/s2

0.846m/s2

K=1.5 m/s

Hand-arm vibration ah,D

(Drilling into metal) 1.454 m/s2

K=1.5 m/s2

1.843m/s2

K=1.5 m/s2

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardized test given in

EN60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories,

may significantly increase the exposure level.

• The times when the tool is switched off or

when it is running but not actually doing the

job, may significantly reduce the exposure

level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns.

Description

The numbers in the text refer to the diagrams on

pages 2- 4

Fig. A

1. Machine

2. Battery

3. Battery unlock button

4. Battery charge indication

5. Charger

6. Charger LED indicators

7. Chuck

9. Gear selection switch

10. Direction switch

11. On / off switch

12. Torque adjustment ring

13. Work light

14. Belt hook

Lithium-Ion technology

The batteries provided with this machine have

Lithium-Ion technology.

One advantage of using Lithium-Ion

batteries is that, until the battery is almost

empty, hardly and power fading is

noticeable. The machine can be used

until you start noticing that the power of

the drill is elapsed. The battery is

discharged now and needs to be

charged.

Another advantage is that Lithium-Ion

batteries have no memory effect.

Therefore they can be charged at any

moment without degrading, independent

of the charging state of the battery.

3. OPERATING

The battery must be charged before first

use.

Removing the battery from the machine

Fig. B

• Hold the machine (1) firmly with one hand

• Push down the battery unlock button (3)

located on the rear side of the battery (2) with

the other hand.

• Keep pushing this button (3) down and slide

the battery backwards out of the machine, like

shown in Fig. B.

Inserting the battery into the machine

Fig. B

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

• Hold the machine (1) firmly with one hand

• Insert the battery (2) into the base of the

machine as shown in Fig. B.

• Push the battery further forward until it clicks

into place.

Checking the battery charging status

Fig. C

The included battery is delivered in partly

charged condition.

• To check the battery charge status, push the

button (4) on battery shortly.

• The battery has 4 lights indicating the charge

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1121P Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info