Bedienungsanleitung Ferm CDM1141P (Seite 6 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

763855

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Charger CDA1131P

Charger input 100-240VAC 50-60Hz,

50W

Charger output 20V 2A

Charging time 2Ah battery 60 minutes

Charging time 4Ah battery 120 minutes

Recommended batteries CDA1132P, CDA1133P

Weight 0.36 kg

Battery CDA1132P

Battery Type Lithium-Ion

Voltage 20V

Capacity 2.0 Ah

Recommended charger CDA1131P

Weight 0.38 kg

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with

a standardized test given in EN 62841; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

significantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

Description

The numbers in the text refer to the diagrams on

pages 2- 3

Fig. A

1. Machine

2. Battery

3. Battery unlock button

4. Battery charge indication

5. Charger

6. Charger LED indicators

7. Chuck

9. Gear selection switch

10. Direction switch

11. On / off switch

12. Torque adjustment ring

13. Work light

14. Belt hook

3. OPERATING

The battery must be charged before first

use.

Removing the battery from the machine

Fig. B

• Hold the machine (1) firmly with one hand

• Push down the battery unlock button (3)

located on the rear side of the battery (2) with

the other hand.

• Keep pushing this button (3) down and slide

the battery backwards out of the machine, like

shown in Fig. B.

Inserting the battery into the machine

Fig. B

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

• Hold the machine (1) firmly with one hand

• Insert the battery (2) into the base of the

machine as shown in Fig. B.

• Push the battery further forward until it clicks

into place.

Checking the battery charging status

Fig. C

The included battery is delivered in partly

charged condition.

• To check the battery charge status, push the

button (4) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more

charge the battery has left.

Charging the battery (with the charger)

Fig. C

• Take the battery (2) from the machine

• Turn the battery (2) to upside down position and

slide it onto the charger (5) as shown in Fig. C.

•

Push the battery until it is fully pushed into the

slot.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1141P Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info