Bedienungsanleitung Ferm CDM1141P (Seite 8 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

763855

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Adjusting the torque

Fig. A

The machine has different torque settings and

a special drill mode to set the power being

transmitted to the chuck.

By rotating the torque adjustment ring (12),

screws can be driven to a predetermined depth,

which is ideal for repetitive work. The higher the

number, the more torque will be transmitted.

• Select a low setting for small screws or soft

work material.

• Select a high setting for large screws, hard

work materials and when removing screws.

• You should preferably choose a setting as

low as possible when driving screws. Select

a higher setting if the motor slips before the

screw is fully tightened.

• For drilling, turn the torque adjustment ring

(12) to the setting for drilling by fully turning it

counterclockwise.

Ensure that the direction switch (10) is

always set to  during drilling.

The machine is equipped with electronic

overload protection function. When the

machine gets overloaded it will shut

down automatically. When this happens,

please wait for at least 5 seconds to let

the overload protection reset itself.

Work light (13)

Fig. A

The machine is equipped with a work light to

illuminate the work location.

• It automatically switches on when the on/off

switch is being pressed.

• It automatically switches off when the on/off

switch is released again.

Belt hook (14)

Fig. A

The machine is equipped with a belt hook for

hanging the machine to your belt during use.

Always switch the direction switch (10) to

middle position to avoid accidental

startup of the machine.

• When delivered, the belt hook (14) is

assembled to the left side of the machine.

• It can easily be removed by removing the

screw on the hook and taking it off.

• It can be assembled on the right side of the

machine when this is preferred.

User tips

When driving screws into wood, metal and other

materials:

• Before using the appliance check if the drill or

screw bit is properly fitted and centered inside

the drill chuck.

• Screw bits are available in several shapes and

dimensions. When unsure, always try if the bit

fits on the screw head without any free play

before using the machine.

• Make sure the machine is not running when

it contacts the screw. A rotating bit may slip.

This could result in damage to the work piece.

When drilling into wood, metal and other materials:

• With small diameter drills use a high drill speed.

For large diameter drills use a low drill speed.

• For hard materials, select a low drill speed, for

soft materials select a high drill speed.

• Fix the work piece properly, preferably by

using a clamp or vice.

• During drilling draw back the drill out of the

hole frequently so swarf or drill dust will be

removed.

When drilling in metal:

• Use a metal drill (HSS). For the best results you

should cool the bit with oil.

• Metal (HSS) drills can also be used drilling into

plastic.

4. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1141P Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info