58 Ferm
CIRCULAR SAW
THE PICTURES MENTIONED IN THE TEXT ARE
CORRESPONDING WITH THE PICTURES AT
PAGE 2.
CONTENTS
1. Technical specifitions
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig.A
1. Handgrip
2. Type plate
3. On/off switch
4. Cut depth clamping knob
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagon screw
9. Soleplate
10. Retaining ring
11. Saw blade
12. Rip fence
13. Rip fence clamping knob
14. Sawing angle clamping knob
-Shaft locking knob (Fig. D2)
15. Laser switch
UNPACKING
The circular handsaw is shipped with:
1Rip fence
2TCT Saw blades Ø 185 mm (Z18 + Z24)
1Allen key
1Set of carbon brushes
12 Batteries
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts are
present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Danger of bodily injury or material damage.
Indicates electrical shock hazard.
CE Conforms to the applicable European safety
standards
Class II equipment – double insulated – the plug
does not have to be earthed
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Caution! Laser beam! Never look into the light
beam and never aim the laser at a person when it is
switched on.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corres-ponds
to the voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is required.
Replacing cables or plugs
If the mains cable becomes damaged, it must be replaced
with a special mains cable available from the
manufacturer or the manufacturer’s customer service.
Dispose of old cables or plugs immediately after
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1200 W
No load speed | 4500/min.
Saw blade dimensions | 185x20x2.8 mm
Number of teeth | Z18
Weight | 4.26 kg
Lpa (sound pressure level) | 88.0 dB(A)
Lwa (sound power level) | 101.0 dB(A)
aw(vibration value) | 1.604 m/s2
Ferm 3
SPARE PARTS LIST FKS-185L2
REF NR DESCRIPTION FERM NR
2CARBON BRUSH HOLDER 409400
3CARBON BRUSH SET 409401
4CARBON BRUSH CAP 409402
6 STATOR 409403
10 BALL BEARING 607 Z 800607
11 ROTOR 409404
12 SELF-LOCKING PLATE 409405
13 RETURN SPRING 409406
14 BALL BEARING 6000Z 806000
22 BALL BEARING 6001 ZZ 806001
24 SHAFT 409407
27 SOCKET HEAD SCREW 409408
28 OUTER FLANGE 409409
30 INNER FLANGE 409410
42 BASE 409411
44 CHECH SCREW 409412
45 NUT 409413
50 + 51 SWITCH + CAPICTOR 409414
57 SPANNER 409415
59 GEAR 409416
60 GUIDE 409419
