763696
8
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
8
EN
PETROL CHAIN SAW 61.5CC
CSM1045 61.5CC
Thank you for buying this FERM product. By
doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Do not allow flames or sparks near fuel.
Warning! Hot surface.
Warning! Intoxication risk.
Danger, beware of kickbacks! Avoid bar
nose contact with the cut object.
Do not attempt to hold the saw
with only one hand. Hold the saw
with both hands.
Keep bystanders away. Never work while
people, especilly children or pets are
nearby.
Whenever the machine is in use, safety
goggles must be worn to safeguard
against flying objects, as must ear
protectors, such as asoundproof helmet,
in order to protect the operator’s
hearing. If the operator is working in an
area where there is a risk of falling
objects, a safety helmet must also be
worn.
Wear gloves to protect your hands.
Wear safety boots.
Pull to start the engine
Acoustic power level LWA.
The port to refuel “MIX GASOLINE”
The port to top up chain oil
Setting the switch to the “|” position, the
engine starts. Setting the switch to the
“O” position, the engine stops
immediately.
Choke will close when pulling the choke
knob.
HThe screw under the “H” stamp is The
High-speed adjustment screw.
LThe screw under the “L” stamp is The
Slow-speed adjustment screw.
TThe screw at the left of the “T” stamp is
the idle adjustment screw.
Shows the directions that the chain
brake is released (white arrow) and
activated (black arrow).
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm CSM1045 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info