Bedienungsanleitung Ferm CSM1045 (Seite 10 von 28) (Englisch)

763696

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

• If the fuel overflows the engine must not be

started. It is necessary to clean the unit. Under

no circumstances should the unit be started

until the petrol vapours have dispersed.

• Move the chain saw at least 3 m from the

fuelling point before starting the engine.

Exhaust pipe and parts close to it may be

very hot - danger of burning.

Never run the internal combustion

engine inside a closed room -

intoxication risk!

For security reasons always replace the fuel tank

and its cap if damaged.

Oil for Saw Chains

To lubricate the saw chain and guide bar, use only

ecological, biologically degradable quality oil for

saw chains and eventually oil for saw chains on

the basis of mineral oils (ISO VG 100).

Never use oil that has already been used!

Already used oil does not sufficiently

lubricate the chain and in addition can

harm the environment.

Danger of kickback

When working with the chain saw, there can

appear to be a kickback. This kickback can be

caused when the top ending of the guide bar

touches the wood or any other solid object. At this

moment, the chain saw ceases to be controllable

and it is kick backed with a high velocity in the

direction of the user. This can cause severe injury.

Danger of kickback. Kickback can cause

fatal injury.

To avoid kickbacks, follow these instructions:

• Hold the chainsaw firmly in both hands

• Start cutting when the unit is already running -

cut only at full performance.

• Never cut using the top of the guide bar.

• Always watch the end of the guide bar.

• Never use the chainsaw with your arms

stretched.

• Never cut while on a ladder or above shoulder

level.

• Be careful when proceeding with the already

started cut.

• Never work too much when leaning forwards.

• Never cut more than one branch at a time.

• Always work with the correctly sharpened and

tight saw chain.

• Remove the chainsaw from the cut only when

the saw chain is running.

2. MACHINE INFORMATION

Intended use

This chainsaw is designed for infrequent use by

homeowners or gardeners and is intended for

such general applications as:

• Clearing;

• Pruning;

• Cutting firewood.

It is not intended for professional (industrial) use.

Due to vibration, prolonged periods of operation

may cause circulatory or nerve problems in the

user’s fingers, hands and joints of hands. There

may appear prickling of body parts, itching,

twinge, pains, and skin changes. In this case,

medical examination is recommended.

Technical specifications

Model No. CSM1045

Engine type Air-cooled, 2-stroke

Engine displacement 61.5 cm3

Maximum engine power 2.4kw

Max. Engine speed 10000min-1

Engine idling speed Max.3000 min-1 ±300

Maximum chain speed 21 m/s

Chain pitch 0.325” (0,83 cm)

Chain gauge 0.058” (0,15 cm)

Sprocket 6 Teeth x 9.525mm

Volume of fuel tank 460ml

Volume of oil tank 260ml

Length - guide bar 20” (50cm)

Usable cutting length 45cm

Fuel consumption ca. 1200 g/kWh

Spark plug model L7T

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CSM1045 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info