Bedienungsanleitung Ferm CTM1018 (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

763693

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

COMBITOOL

CTM1018

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result in

electric shock, fire and/or serious injury. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user

manual or on the product:

Denotes risk of personal injury, loss of life

or damage to the tool in case of

nonobservance of the instructions in this

manual.

Risk of electric shock

Variable speed control

Indoor use only

Wear ear and eye protection

Wear a dust mask

Do not press the spindle lock button

while the motor is running.

Class II machine - Double insulation - You

don’t need any earthed plug.

Max temperature 40°C

Do not throw the battery into fire

Do not throw the battery into water

Do not dispose of the product in

unsuitable containers.

Separate collection for Li-ion battery.

The product is in accordance with the

applicable safety standards in the

European directives.

Specific safety instructions

a) This power tool is intended to function as a

grinder, sander, wire brush, polisher, carving

or cut-off tool. Read all safety warnings,

instructions, illustrations and specifications

provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, fire and/or serious injury.

c) Do not use accessories which are not

specifically designed and recommended

by the tool manufacturer. Just because the

accessory can be attached to your power tool,

it does not assure safe operation.

d) The rated speed of the grinding accessories

must be at least equal to the maximum

speed marked on the power tool. Grinding

accessories running faster than their rated

speed can break and fly apart.

e) The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized

accessories cannot be adequately controlled.

f) The arbour size of wheels, sanding drums

or any other accessory must properly fit

the spindle or collet of the power tool.

Accessories that do not match the mounting

hardware of the power tool will run out of

balance, vibrate excessively and can lead to

loss of control of the power tool.

g) Mandrel mounted wheels, sanding drums,

cutters or other accessories must be

fully

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CTM1018 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info