Ferm 0382 Ferm
MULTI MOTION SANDER
The numbers in the following text correspond with the pictures at page 2.
Important: Always read the instructions for electrical devices thoroughly before use. You will
have a better understanding of your product and avoid unnecessary risks. Keep these
instructions in good order for future use, keep them together with the device when transferring it
to a third party.
Use
This device is intended for polishing and sanding surfaces.
This device is not designed for wet sanding or commercial use
Contents
1. Machine data
2. Safety regulations
3. Assembly
4. Use
5. Service and maintenance
1. MACHINE DATA
Technical specifications
Package contents
1 Sanding and polishing machine
3 Polishing hoods (textile fleece)
3 Foam disks
3 x 3 Abrasive cloth disks (coarse, medium, fine)
1 Operating instructions
Voltage 230 - 240 V~
Frequency 50 Hz
Power consumption 120 W
Idle speed 200 - 400/min
Diameter of sanding/polishing disk 125 mm
Nominal diameter of accessories:
Abrasive cloth with Velcro fastener,
foam disks with Velcro fastener,
polishing hoods with Velcro fastener 125 mm
Weight 4.2 kg
Lpa (acoustic pressure) 77 dB(A)
Lwa (acoustic power) 88 dB(A)
Oscillation value 2.47 m/s
2
Protection class II
IP (protection against dust and water) IP 20
GB
Spare parts list
Position Description Ferm No.
1 Sanding disc 400685
2 Bushing 400686
4, 5, 7, 9 Gear set including bearings 400687
14 Stator 400688
15 Rotor 400689
17 Carbon brush set 400690
24, 25, 26 Switch complete 400691
37 Joint with dust adapter 400692
38 Bearing for gears 800608
