Ferm 81
UK
D
NL
F
E
P
I
S
FIN
N
DK
04 Ferm
1 Warranty card
Features
Fig.1
1. ON/OFF key switch
2. Speed adjustment wheel
3. Vacuum connection
4. Sanding/polishing disks with Velcro fastener
2. SAFETY REGULATIONS
Explanation of the symbols
The following symbols are used in these instructions and on the device:
Device Class II – double insulation – No grounded connector plug is required.
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
General Safety Rules
Warning! Read all instructions. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
1) Work area
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools create sparks which may ignite the dust of
fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs which earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
