Bedienungsanleitung Ferm FPJS 1800 LK (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

110287

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Ferm

Put the jig saw on the rounded front of the •

bottom plate.

Switch on the appliance and slowly lower the •

jig saw until it touches the work piece.

Let the jig saw cut into the work piece gently •

without forcing it.

When you are through the work piece, take •

the jig saw out of the hole.

Place the appliance in the normal position in •

the sawn hole and continue the saw cut.

You can also cut in by first drilling a hole in the

work piece. To do this, use a bit that makes a hole

big enough for the saw blade. Now you can carry

out the steps described under ‚Sawing‘.

LCD display

Fig. H

This machine is equipped with an LCD display:

To turn the display on, press the display button •

(13) once. To turn the display off, press the

display button again.

The clock (14) and minutes (15) remaining •

icons indicate the number of minutes of

running time that are available before the

battery requires recharging (Lithium-Ion

battery only)

The battery icon (16) indicates the amount of •

charge remaining in the battery. Each charge

bar displayed indicates approximately 10%

charge remaining in the battery. A total of 10

charge bars indicates a fully charged battery.

LED work light

Fig. I

Press the light button to switch the LED work light

on. Press the light button again to switch the LED

work light off.

Saw blade storage

Fig. J

Saw blades can be stored in the bottom plate:

Pull the bottom blade cover from the bottom •

plate.

Insert the saw blade in the bottom blade cover.•

Slide the bottom blade cover back into the •

bottom plate.

Hex key storage

Fig. K

The included hex key can be stored in the battery

compartment.

5. SERVICE & MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

The machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Cleaning

Keep the ventilation slots of the machine clean to

prevent overheating of the engine. Regularly clean

the machine housing with a soft cloth, preferably

after each use. Keep the ventilation slots free from

dust and dirt. If the dirt does not come off use a

soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water,

etc. These solvents may damage the plastic parts.

Lubrication

The machine requires no additional lubrication.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. In the back of this manual you find

an exploded view showing the parts that can be

ordered.

Environment

To prevent damage during transport, the appliance

is delivered in a solid packaging which consists

largely of reusable material.

Therefore please make use of options for recycling

the packaging.

Faulty and/or discarded electrical or

electronic apparatus have to be

collected at the appropriate recycling

locations.

Warranty

The warranty conditions can be found on the

separately enclosed warranty card.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm FPJS 1800 LK Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info