GB
RECIPROCATING SAW
The numbers in the following text
correspond with the pictures at page 2
TECHNICAL SPECIFICATIONS
Voltage | 230 V~
Frequency | 50 Hz
Power input | 710 W
No load speed | 600-2500/min
Maximum cutting thickness | 115 mm
Stroke length | 30 mm
Weight | 3.3 kg
Lpa (sound pressure level) | 92.3 dB(A)
Lwa (sound pressure capacity) | 103.3 dB(A)
Vibration value | 11.3 m/s
2
PRODUCT INFORMATION
Fig.A
1. Blade
2. Footplate
3. Blade clamp screw
4. Trigger switch
5. Speed controller
6. Trigger lock button
7. Mains lead
8. Footplate length adjustment screws
9. 3 mm hexagon key (not s hown)
10. 4 mm hexagon key (not shown)
SAFETY INSTRUCTIONS
The following pictograms are used in these
instructions for use:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Carefully read this manual before using the
machine. Make sure that you know how the
machine functions and how to operate it.
Maintain the machine in accordance with
the instructions to make sure it functions
properly. Keep this manual and the enclosed
documentation with the machine.
When using electric machines always
observe the safety regulations applicable
in your country to reduce the risk of fire,
electric shock and personal injury. Read the
following safety instructions and also the
enclosed safety instructions.
Keep these instructions in a safe place!
ADDITIONAL SAFETY INSTRUCTIONS
The machine must not be damp and must
not be operated in a wet environment.
Always inspect cable and plug before using
machine. Only have damage repaired by a
qualified professional.
Only insert the plug into the mains socket
when the machine is switched off. Wear
protective gloves and sturdy footwear.
Do not saw materials containing
asbestos!!!
• Wearprotectivegoggleswhenworkingwith
materials which produce large amounts of
chips.
• Wearaprotectivemaskwhensawingother
fibrous materials.
• Portableequipmentusedoutdoorsmust
be connected with a fault-current circuit
breaker.
• Extensioncablesandplugsmustbe
approved for outdoors.
• Removeadjustingkeysandwrenches
before turning the tool on.
• Secureyourworkpiecewithclamps.Always
lead cable away from machine towards the
rear.
• Movemachinetowardstheworkpieceonly
when switched on.
• Alwaysholdmachinewithbothhandsand
ensure that you have a safe footing while
working.
• Themachinemaybeoperatedonlywiththe
foot plate mounted. When sawing, the foot
plate must always rest on the workpiece.
