Bedienungsanleitung Ferm GTM1003 (Seite 9 von 26) (Englisch)

763651

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

3. OPERATING

Before any operating, mounting or adjusting

disconnect the battery from the machine

Warning! You may not use the grass

trimmer without the protection guard.

Mounting the Protection guard (Fig. B1)

• Fit the protection guard (10) onto the trimmer

head housing.

• Secure the guard using the screw (11)

delivered.

Mounting the guardrail (Fig. B2)

• Squeeze the ends of the guardrail (12) together

and slide into the holes of the trimmer head

housing

• The guardrail can be set in different protection

distances. To adjust the rail, simply press or

pull the rail.

The machine must be charged before

first use

Removing the battery from the machine

Fig. C1

• Hold the machine firmly with one hand.

• Push down the battery unlock button (2)

located on the rear side of the battery (1) with

the other hand.

• Keep pushing the unlock button (2) down

and slide the battery backwards out of the

machine, like shown in Fig. C1.

Inserting the battery into the machine

Fig. C1

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

• Hold the machine firmly with one hand.

•

Insert the battery (1) into the base of the machine.

• Push the battery further forward until it clicks

into place.

Checking the battery charging status

Fig. C3

The included battery is delivered in partly

charged condition.

• To check the battery charge status, push the

button (3) on battery (1) shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more

charge the battery has left.

Charging the battery

Fig. C2

• Take the battery (1) out of the machine

• Turn the battery (1) to upside down position and

slide it onto the charger (4) as shown in Fig. C2.

• Push the battery (1) until it is fully pushed into

the slot.

• Plug the charger (4) in an electrical outlet

and wait a while. The LED indicator (5) on

the charger (4) will lighten up and show the

charging status.

Charging indication light

Fig. C2

The charger has a charging indication light (5)

which indicates the status of the charging process:

LED color Status

Red Battery charging in progress

Green Battery charging finished, battery fully charged

• Fullychargingthebatterymaytakeupto1hour.

• After the battery is fully charged remove the

charger plug from the outlet and remove the

battery from the charger.

• The battery can be stored or directly installed

on the machine.

Lithium-Ion cells can be stored for a long

period without losing much of their

charge. When the machine is not being

used over a longer period of time it is best

to store the battery in charged condition.

Mounting the front handle (Fig. D1)

• Place the handle (8) on the holder mounted on

the upper shaft.

• Fit the bolt in the hexagon hole and mount the

knob (9) onto the bolt.

Adjusting the front handle (Fig. D2)

• Unscrew the knob (9) slightly and press or pull

the front handle (8) in to desirable position.

This can either be down or upwards and

rotatable around upper shaft.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm GTM1003 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info