Bedienungsanleitung Ferm HAM1015 (Seite 3 von 88) (Alle Sprachen)

762272

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

HOT AIR GUN

The numbers in the following text correspond

with the pictures at page 2

Always read the instruction for electrical

products carefully before use. It will help

you understand your product more easily

and avoid unnecessary risks. Keep this

instruction manual in a safe place for

future use.

1. MACHINE INFORMATION

Technical specifications

Voltage 220-240 V~

Frequency 50 Hz

Power input 2000 W

Weight 0.62 kg

IP Class IP 20

Position I

Air flow 300 l/min

Air temperature 450 °C

Position II

Air flow 500 l/min

Air temperature 600 °C

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with

a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns

Product information

Fig. A

1. Switch

2. Ventilation slots

3. Nozzle outlet

2. SAFETY INSTRUCTIONS

Explanation of the symbols

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Indicates electrical shock hazard.

Additional safety instructions

When using electric tools, basic safety

precautions should always be followed to reduce

the risk of fire, electric shock and personal injury.

Read all these instructions before attempting to

operate this product and save these instructions.

Before using the appliance

• Check the following:

• Make sure the voltage of the hot air gun

corresponds with the power voltage;

• Are the mains lead and the mains plug

in a good state: strong, without ravels or

damages.

• Avoid the use of long extension cables;

• Do not use the appliance under moist

circumstances;

• The metal mouthpiece gets hot. Watch out and

do not touch the metal mouthpiece;

• Prevent damage of the heating element. Do

not lock or block the mouth piece;

• Do not leave the appliance when switched on;

• Do not use the appliance for drying hair or for

drying living human beings in general;

• Do not use the appliance in a bath, above

water or in spaces where easy inflammable

liquids are used.

This appliance operates at a temperature

of 600 degrees without visible signs of

this temperature (no flames), still there is

a chance of fire risk. Watch out for the

hot air stream from the mouth piece. This

air stream can cause burns.

When operating the appliance

• If you are going to use the hot air gun, vapours

and gas can be released during a short time.

This can be harmful for your health. Asthmatics

can suffer hindrance of it;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm HAM1015 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info