Bedienungsanleitung Ferm hdm 1017 (Seite 5 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

388771

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

2. SAFETY INSTRUCTIONS

Explanation of the symbols

DESCRIPTION (FIG. A)

Denotes risk of personal injury, loss of

life or damage to the tool in case of

non-observance of the instructions in

this manual.

Indicates electrical shock hazard.

Wear ear and eye protection.

Wear a dust mask. Working with wood,

metals and other materials may produce

dust that is harmful to health. Do not

work with material containing asbestos.

Specific safety instructions

For use of this machine/tool:

• Inspect the surface to be drilled for hidden

electrical wiring, gas pipes or other obstacles

(for example, using a metal detector).

• Check the following points:

• Does the appliance’s voltage correspond

with the mains power supply voltage?

• Are power cords, insulation and plug in

good order: sound, not loose or damaged?

• Is there a good, rm connection at the

mains socket?

• Does the drill show any sign of abnormal

running, overheating or excessive sparking?

• Whenever any of the problems mentioned

above appear, immediately cease using the

machine and have it repaired by an expert.

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire

may make exposed metal parts of the power tool

“live” and give the operator an electric shock.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of re, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the mains voltage is

the same as on the type plate of the

machine.

Class II machine - Double insulation -

You don’t need any earthed plug.

Replacement of power cords or plugs

Immediately dispose of old cords and plugs once

they have been replaced.

It is dangerous to plug a loose power cord into a

mains power socket.

Use of extension leads

Only ever use approved extension leads that are

suitable for the power rating of the machine. The

minimum core thickness is 1.5 mm

. Whenever

using a reel extension lead, always fully unroll the

lead.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes and

verticiliosis in the collector.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation

3. OPERATING

Hammer drills require very little operator

pressure. Excessive pressure on the tool

can lead to unnecessary overheating of

the motor, and burning of the driven tool.

Auxiliary handgrip

The auxiliary handgrip can be rotated 360º

around the drill head, enabling safe and

comfortable operation, for both left and right-

handed users.

• Loosen the handgrip by turning it

anticlockwise.

• Rotate the handgrip to the desire position.

• Retighten the handgrip in the new position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm hdm 1017 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info