Bedienungsanleitung Ferm HDM1038P (Seite 5 von 108) (Alle Sprachen)

764194

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Use of extension leads

Only ever use approved extension leads that are

suitable for the power rating of the machine. The

minimum core thickness is 1.5 mm2. Whenever

using a reel extension lead, always fully unroll the

lead.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch.

• Smoke or stench of scorched isolation.

2. MACHINE INFORMATION

Intended use

This rotary hammer is intended for drilling holes

in masonry such as brick, concrete and similar

material. Furthermore, the machine can be used

as a demolition hammer in combination with the

SDS cold chisels provided. The machine is on no

account intended for other purposes.

Technical specifications HDM1038P

Mains voltage 220-240 V ~

Mains frequency 50 Hz

Power input 800 W

No-load speed 0-1250 /min

Impact rate 0-5550 /min

Max. Drill diameter

-Concrete

-Steel

-Wood

Ø 26 mm

Ø 13 mm

Ø 30 mm

Weight 3.3kg

Sound pressure (LPA)92 dB(A) K=3 dB (A)

Acoustic power (LWA)103 dB(A) K=3 dB (A)

Vibration

Hammer drilling concrete ah,HD 16.1 m/s2 K=1,5 m/s2

Chiseling ah,Cheq 15.8 m/s2 K=1,5 m/s2

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardized test given in

EN60745. It may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories,

may significantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm and organizing your work

patterns.

Description

The numbers in the text refer to the diagrams on

pages 2-3

Fig. A

1. Left/right rotation switch

2. On/Off switch

4. Lock-on button

5. Function selection switch

6. Side handle

7. Locking sleeve

8. Depth stop ruler

9. Depth stop button

3. OPERATING

Hammer drills require very little operator

pressure. Excessive pressure on the tool

can lead to unnecessary overheating of

the motor, and burning of the driven tool.

It also may happen the drill bit deforms

and cannot be removed from the

machine again.

Side handle

Fig. A

The side handle (6) can be rotated 360° around

the drill head, enabling safe and comfortable

operation for both left and right-handed users.

• Loosen the handgrip by turning it

anticlockwise.

• Rotate the handgrip to the desired position.

• Retighten the handgrip in the new position by

turning it clockwise.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm HDM1038P Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info