762313
7
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
7
EN
Description
The numbers in the text refer to the diagrams on
pages 2-3
Fig. A, B, C
1. Battery
2. Battery unlock button
3. Battery charge indication
4. Charger
5. Charger LED indicators
6. On/off switch
7. Cutting blade
8. Protection guard
9. Safety switch
3. OPERATING
The machine must be charged before
first use.
Removing the battery from the machine
Fig. C1
Hold the machine firmly with one hand.
Push down the battery unlock button (2)
located on the rear side of the battery (1) with
the other hand.
Keep pushing the unlock button (2) down
and slide the battery backwards out of the
machine, like shown in Fig. C1.
Inserting the battery into the machine
Fig. C1
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
Hold the machine firmly with one hand.
Insert the battery (1) into the base of the
machine.
Push the battery further forward until it clicks
into place.
Checking the battery charging status
Fig. C3
The included battery is delivered in partly
charged condition.
To check the battery charge status, push the
button (3) on battery (1) shortly.
The battery has 3 lights indicating the charge
level, the more lights that burn, the more
charge the battery has left.
Charging the battery
Fig. C2
Take the battery (1) out of the machine
Turn the battery (1) to upside down position and
slide it onto the charger (4) as shown in Fig. C2.
Push the battery (1) until it is fully pushed into
the slot.
Plug the charger (4) in an electrical outlet
and wait a while. The LED indicator (5) on
the charger (4) will lighten up and show the
charging status.
Charging indication light
Fig. C2
The charger has a charging indication light
(5) which indicates the status of the charging
process:
LED color Status
Red Battery charging in progress
Green Battery charging finished, battery fully charged
• Fullychargingthebatterymaytakeupto1hour.
After the battery is fully charged remove the
charger plug from the outlet and remove the
battery from the charger.
The battery can be stored or directly installed
on the machine.
Lithium-Ion cells can be stored for a long
period without losing much of their
charge. When the machine is not being
used over a longer period of time it is best
to store the battery in charged condition.
Before using, always visually inspect to
see that the blades, blade bolts and
cutter assembly are not worn or
damaged.
Please keep power switched off and
disconnect the battery. Replace worn or
damaged blades and bolts in sets to preserve
balance.
Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm HTM1002 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info