Bedienungsanleitung Ferm JSM1030 (Seite 6 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Polnisch, Türkisch, Schwedisch, Finnisch)

764184

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Wear safety goggles.

Wear hearing protection.

Wear a dust mask.

Do not expose to rain

Keep bystanders away

Double insulated.

Do not dispose of the product in

unsuitable containers.

The product is in accordance with the

applicable safety standards in the

European directives.

Additional safety warnings for jigsaws

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Wear safety goggles, hearing protection and

if necessary other protective means, such as

safety gloves, safety shoes, etc.

• Before use, remove all nails and other metal

objects from the workpiece.

• Make sure that the workpiece is properly

supported or fixed.

• Do not use the machine without the guard.

• Inspect the saw blade before each use. Do not

use saw blades which are bent, cracked, or

otherwise damaged.

• Make sure that the saw blade is properly

mounted.

• Only use saw blades that are suitable for use

with the machine.

• Only use saw blades with the correct

dimensions.

• Do not use other accessories than saw blades.

• Do not use saw blades made of HSS steel.

• Do not use the machine on workpieces

requiring a maximum sawing depth that

exceeds the maximum sawing depth of the

saw blade.

• Hold the machine by the insulated gripping

surfaces where the saw blade may contact

hidden wiring or the mains cable. If the saw

blade contacts a ‘live‘ wire, the exposed metal

parts of the machine can also become ‘live‘.

Risk of electric shock.

• Let the machine run at no load in a safe area

after mounting the saw blade. If the machine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

• Beware that the saw blade continues to

rotate for a short period after switching off

the machine. Do not attempt to bring the saw

blade to a standstill yourself.

Kickback

Kickback is the upward and backward

movement of the saw blade when the saw blade

unexpectedly touches an object. Securely hold

the machine during use. Keep your attention

focused on the operation.

Kickback is usually caused by:

- unintentionally touching hard objects or

materials with the rotating saw blade;

- a blunt saw blade;

- a saw blade that is not properly mounted;

- sawing into a previous cut;

- a lack of attention to the operation;

- an instable stance.

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use an

extension cable reel, always fully unroll the

cable.

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm JSM1030 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info