RADIAL MITRE SAW
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2 & 3
Caution! For your own safety, carefully read these
instructions for use before using the machine.
CONTENTS:
1. Machine information
2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MACHINE INFORMATION
INTENDED USE
The electro tool is intended as a stationary machine for
making straight lengthways and crossways cuts in wood.
Horizontal mitre angles of -45° to +45° as well as vertical
bevel angles of -45° to +45° are possible.
TECHNICAL SPECIFICATION
FEATURES
Figs. 1, 2 and 3
1. On/off switch
2. Unlock button
3. Motor housing
4. Cover carbon brush
5. Lock-pin
6. Blade protective cover
7. Workpiece clamp
8. Guide fence
9. Knob adjusting saw angle
10. Handle for turntable and locking slide rails
11. Fixing knob clamp
12. Handle adjusting bevel angle
13. Connection dust bag
14. Slide rail
15. Bevel angle
16. Handle
17. Cover
18. Saw blade bolt
19. Flange
20. Screw
21. Guiding strip
22. Lock-button saw blade
PACKAGE CONTENTS
1 Radial mitre saw
1 Dust bag
1 Clamp
4 Rubbers
1 Key for changing the saw blade
1 Instructions for use
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for any
transport damage.
2. SAFETY
When using the machine, always carefully follow
the safety precautions supplied and the safety
instructions given below.
LIST OF SYMBOLS
The following pictograms are used in these instructions
and on the machine itself:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
Voltage | 230 V ~
Capacity | 2000 W
Machine class | II (double insulated)
Revolutions, not under load | 4700/min
Saw blade measurement | 305x25.4x3.0mm
Angle for mitring | 45º (left and right)
Angle for bevelling | 45º (only left)
Mitre saw maximum sawing capacity:
- Mitre 0º, Bevel 0º | 110x370mm
- Mitre 45º, Bevel 45º | 55x330mm
- Mitre 45º, Bevel 0º | 110x330mm
- Mitre 0º, Bevel 45º | 55x370mm
Weight | 29.3 kg
Lpa (sound pressure) | 99.2 dB(A)
Lwa (acoustic capacity | 112.2 dB(A)
Vibration level | 22.1 m/s
2
4 Ferm Ferm 57
