Bedienungsanleitung Ferm MSM1031 (Seite 9 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

493544

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

workpieces:

• Fix the piece of work in place using the clamp

• Screw up the knob (10) a half turn

anticlockwise.

• Slide the machine completely towards

yourself

• Turn on the machine using the switch

• Bring the saw slowly downwards so the saw

blade saws through the piece of work

• Push the machine slowly backwards (in

direction of guide fence)

• Bring the machine gently up again and switch

it off by letting go of the switch

Using the laser

Fig. 2b

● To switch on the laser, press the on/off switch

24.

● To switch off the laser, release the on/off

switch 24.



Always make sure that the machine is not

connected to the mains electricity when

you carry out any maintenance of the

mechanism.

Slide rails

Dirt can damage the slide rails and thereupon the

operating of the machine.

• Clean the slide rails regularly with a soft cloth.

• Drip some lubricating oil on the slide rails

• Move the mitre saw forwards and backwards

so the oil spreads over the complete rails

Ferm machines are designed to function for a

long time without any problems with a minimum of

maintenance. By cleaning the machine regularly

and using it in the correct way you can contribute

to a long life of your machine.

Problem solving

 

• The plug is not in the socket

• The power cord is broken

• The switch is defective. Take the machine to

your Ferm dealer for repair.

 

• The saw blade must be sharpened

• The saw blade is mounted back to front

• The saw blade is clogged with resin or

sawdust

• The saw blade is not suitable for the piece of

work being used

 

• Chips and/or dust must be removed

 

speed

• The extension cord is too thin and/or too long

• The mains voltage is less than 230 V

 

• The saw blade is damaged

 

• The ventilation slots are blocked. Clean them

out with a dry cloth.

 

• The carbon brushes are worn out. Replace

the carbon brushes or consult your Ferm

dealer.

Cleaning

Clean the machine housing regularly with a soft

cloth, preferably after each time you use the

machine. Make sure that the ventilation slots are

free of dust and dirt. For stubborn dirt use a soft

cloth dampened with soapy water. Never use

solvents such as benzene, alcohol, ammonia, etc.

These types of solvents can damage the plastic

parts.

Lubrication

The machine does not need any extra lubrication.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. In the back of this manual you find

an exploded view showing the parts that can be

ordered.

Environment

To prevent damage during transport the machine

is delivered in sturdy packaging. The packaging

is made of recyclable material wherever possible,

so make use of the possibility of recycling the

packaging. When you replace a machine, take the

old one to your local Ferm dealer. Here it will be

dealt with in an environmentally friendly way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1031 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info