Bedienungsanleitung Ferm MSM1034 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

510120

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Ferm

• Wear gloves when you exchange the saw

blade or when rough material is to be sawn. It

is best to keep saw blades in a separate

holder to prevent anyone getting hurt.

• When the machine is equipped with a laser,

this may not be replaced by a different type of

laser. Repairs may only be carried out by the

laser manufacturer or a recognised specialist.

• The operator should wear ear protectors to

reduce any damage to hearing.

• To prevent accidents occurring by the

accidental switching on of the machine, the

plug must always be pulled out of the socket

before adjustment of the stop or the saw head

is carried out, when changing blades or

accessories, and when maintaining the

machine.

• To prevent electric shocks, when plugging the

plug into the socket the metal pins must not be

touched in any way whatsoever.

• Never use the cord to pull the plug out of the

socket. Keep the cord away from oil, heat and

sharp objects.

• Never apply a cleaning or lubrication agent to

a saw blade that is still revolving.

• To prevent fires, never use the machine in the

vicinity of flammable liquids, vapours or gases.

• Always use original accessories: others may

cause wounding.

• Always choose the right saw blade in relation

to the material to be sawn.

• Ensure that during operation, the swinging

guard functions properly. It must move freely

and be able to close by itself. It should never

be jammed in the open position.

• Do not work with material containing asbestos.

• Protect the saw blade from strikes and shocks.

Do not apply side pressure to the saw blade.

Additional safety instructions

1. When using the saw blades with hard metal

teeth (Carbon tipped) it is advisable to use

blades with a negative or slightly positive

cutting angle. Do not use any saw blades with

deeply cut teeth. They can grip the protective

cap.

2. Attention: First carefully assemble all the parts

before starting work. Follow the procedure as

indicated.

3. If you are not familiar with using such a

machine, you would be better to be informed

first by a professional, an instructor or by a

technician.

4. Always clamp or press the workpiece firmly

against the saw guide, before you carry out

the process. The use of all possible clamping

set-ups is preferable to using your hands.

5. Important: If you are holding the workpiece by

hand for the process to be carried out, keep a

minimum distance of 100 mm from the saw

blade.

6. Always press the workpiece against the

bench.

7. Keep the saw blade sharp and check regularly

whether it rotates freely without abnormal

vibrations. Replace the saw blade if

necessary.

8. Allow the machine to rotate freely until it

reaches the maximum number of revolutions,

before you start the process.

9. Maintain the air inlets at the back and the

bottom of the bench saw machine and electric

engine for a longer machine life. Dust piles

must be removed.

10. Always lock the different degree set-ups

before you start processing.

11. Only buy suitable saw blades with a number of

revolutions of at least 4500 revolutions per

minute.

12. Only use the correct saw blade. Too small or

too big saw blades are extremely dangerous.

13. Regularly inspect the saw blade for any faults.

Replace the saw blade if necessary.

14. Grease the new saw blade and clean the

flanges before you assemble the new blade.

Then assemble the blade in the correct

direction and pull the flanges firmly using the

central bolt.

15. Only use original flanges. All other types are

not suitable.

16. Never work without the protective cap of the

saw blade.

17. The moving part of the protective cap must

also remain assembled.

18. Never grease the saw blade while it is rotating.

19. Always keep your hands removed from the

track of the saw blades.

20. Never pick up the workpiece by grasping with

your hands along or behind the saw blade.

21. Ensure that the workpiece never touches the

saw blade before the machine has been

switched on.

22. Never process metal or stone sorts with this

machine.

23. Use support aids in order to support long

workpieces.

24. Never use the machine in a dangerous

environment, where inflammable gases or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1034 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info