Bedienungsanleitung Ferm MSM1034 (Seite 8 von 72) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

510120

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

8 Ferm

fluids are present.

25. Never leave the machine unattended without

first disconnecting it from the mains voltage.

26. If you hear abnormal noises, try to trace them

or take the machine to a recognized fitter, or

repair company.

27. If a part is broken or damaged, replace it or

repair it immediately.

28. Never stand in the track of the saw blade but

stand to the left or the right of the saw bench.

29. Your hands must likewise be placed next to

the track of the saw blade.

30. Always use the feedstick to push the wood

through the saw.

31. Always place the wood at the front of the saw

bench and then push it further back.

32. For mitring only the adjustable guide must be

used and the fence must be removed.

33. Never use the fence as a linear measure for

cutting off beams.

34. If the saw blade is locked: first switch off the

machine before you attend to the fault.

35. Avoid workpieces hitting back in your direction

by taking the following measures:

• Always use sharp saw blades.

• Do not saw too small workpieces.

• Never release the workpiece before it has

been completely pushed through the saw.

• Always adjust the guide parallel to the saw

blade.

• Never remove the saw protection.

36. Before you continue sawing, ensure that you

are standing firmly and that your hands are in

the required position.

37. Never use thinners to clean the machine. Only

use a damp cloth for cleaning.

38. Do not use saw blades which are damaged or

deformed.

39. Replace table insert when worn.

40. Use only saw blades recommended by the

manufacturer.

41. Take care that the selection of the saw blade

depends on the material to be cut.

42. Connect circular saws to a dust-collecting

device when sawing.

43. Use and correct adjustment of the riving knife

44. Use and correct adjustment of the upper saw

blade quard.

45 The dust that is emitted when sawing certain

types of wood can be toxic, i.s. oak, birch, ash,

beech and fibreboard. Certain dust, from

tropical wood types such as rosewood, coco

bolo and afzelia, cause cancer when breathed

in regularly. Ensure therefore that you have

good dust suction installed with a device that

fulfils the following requirements:

• Tube must fit perfectly on the connection

element

• Suction volume must be larger than 550 m3

per hour

• Vacuum at connection more than 740 Pa

• Air speed at connection more than 20 meters/

second

Ensure that the least possible wood dust is

released in the atmosphere. WIPE wood dust

away (do not blow away with pressured air),

repair leaks in the tubes and ensure

appropriate ventilation.

Do not use saw blades which are damaged or

deformed.

Always clamp or press the workpiece firmly

against the saw guide, before you carry out

the process.

Do not modify the machine; unauthorised

parts have not been tested and approved.

Mainly use:

• No unauthorised saw blades

• No unauthorised safety systems 7

• Always use the supplied safety systems!

• Always use a cavity blade for scalloping.

46. Wear ear protectors. The following facors can

be of influence in producing noise

• The kind of material to be cut

• The sawblade

• The force of which the workpiece is fed

Loud noise can lead to hearing damage.

Ensure that you wear ear protectors.

Ensure that the cavity blade is not bent,

this can also cause noise.

47 Residual risks

The following risks are inherent to the use of

these machines:

• Injuries caused by touching the rotating parts

• Injuries caused by disruption of the cutting

blade

• These risks are most evident:

• Within the range of operation

• Within the range of the rotating machine parts

In spite of the application of the relevant

safetyregulations and the implementation of

safety devices, certain residual risks cannot

be avoided. These are:

• Impairment of hearing.

• Risk of accidents caused by the uncovered

parts of the rotating cutting blade.

• Risk of injury when changing the blade.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1034 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info