Bedienungsanleitung Ferm SGM1019 (Seite 6 von 24) (Englisch, Holländisch)

798919

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

Keep handles and grasping surfaces dry,

clean

and free from oil and grease. Slippery

handles and

grasping surfaces do not allow

for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk

of fire when used with another battery pack.

b) Use power tools only with specifically

design ated battery packs. Use of any other

battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects that can make a connection from

one terminal to another. Shorting the battery

terminals together may cause burns or a fire.

Under abusive conditions, liquid may be

ejected

from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e) Do not use a battery pack or tool that is

damaged or modified. Damaged or modified

batteries may exhibit unpredictable behaviour

resulting in fire, explosion or risk of injury.

Do not expose a battery pack or tool to fire

or excessive temperature. Exposure to fire or

temperature above 130 °C may cause explosion.

NOTE The temperature „130 °C“ can be replaced

by the temperature „265 °F“.

Follow all charging instructions and do not

charge the battery pack or tool outside

the temperature range specified in the

instructions. Charging improperly or at

temperatures outside the specified range may

damage the battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SAFETY WARNINGS FOR STAPLE GUN

a) Always assume that the tool contains

fasteners. Careless handling of the tool can

result in unexpected firing of fasteners and

personal injury.

b) Do not point the tool towards yourself or

anyone nearby. Unexpected triggering will

discharge the fastener causing an injury.

c) Do not actuate the tool unless the tool is

placed firmly against the workpiece. If the

tool is not in contact with the workpiece, the

fastener may be deflected away from your

target.

d) Disconnect the tool from the power source

when the fastener jams in the tool. While

removing a jammed fastener, the tacker may

be accidentally activated if it is plugged in.

e) Use caution while removing a jammed

fastener. The mechanism may be under

compression and the fastener may be

forcefully discharged while attempting to free a

jammed condition.

f) Do not use this tool for fastening electrical

cables. It is not designed for electric cable

installation and may damage the insulation of

electric cables thereby causing electric shock

or fire hazards.

SAFETY WARNINGS FOR BATTERY

a) Do not open the battery. Danger of short-

circuiting.

b) Protect the battery against heat, e. g.,

against continuous intense sunlight, fire,

water, and moisture. Danger of explosion.

c) In case of damage and improper use of the

battery, vapours may be emitted. Ventilate

the area and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

d) Use the battery only in conjunction with your

Vonroc product. This measure alone protects

the battery against dangerous overload.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm SGM1019 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info