Bedienungsanleitung Ferm SSM1007 (Seite 5 von 92) (Alle Sprachen)

697793

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

SCROLL SAW

SSM1007

Thank you for buying this Ferm product. By doing

so you now have an excellent product, delivered

by one of Europe’s leading suppliers. All products

delivered to you by Ferm are manu factured

according to the highest standards of performance

and safety. As part of our philosophy we also

provide an excellent customer service, backed

by our comprehensive warranty. We hope you will

enjoy using this product for many years to come.

1. SAFETY INSTRUCTIONS

Explanation of the symbols

Read the operating instructions carefully

before using this device. Familiarise

yourself with its functions and basic

operation. Service the device as per

the instructions to ensure that it always

functions properly. The operating

instructions and the accompanying

documentation must be kept in the

vicinity of the device.

Denotes risk of personal injury, loss of

life or damage to the tool in case of non

observance of the instructions in this

manual.

Denotes risk of electric shock.

Wear ear and eye protection.

Specific safety instructions

• Wear safety goggles and a dust mask.

• This scroll saw machine is for indoor use only.

• Ensure that the teeth of the saw point

downwards prior to using the machine.

• If teeth of the saw blade are missing or are

damaged, then the saw blade must be

replaced immediately.

• Use the scroll saw machine on a stable and flat

surface.

• Never exert pressure on the sides of the saw

blade because it may break.

• Check wooden work pieces for possible

protruding nails etc. and remove these.

• Do not touch the sawing surface with your hands.

• Never leave the sawing machine unattended

while it is running.

• Do not remove any wood debris etc, in the

vicinity of the saw with your hands while it is

running. Turn the machine off before removing

the wood debris.

Immediately switch off the machine when

• Interruption in the mains plug, mains lead or

mains lead damage.

• Defect switch.

• Smoke or stench of scorched isolation.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply corre-

sponds to the voltage on the rating plate.

Mains connection

Only use earthed sockets with earthing wire

connected per the regulations.

Using extension cables

Only use an approved extension cable, corre-

spon ding to the machine power use. The wires

must have a minimum cross section of 1.5 mm2. If

the cable is on a reel, it must be fully laid out.

2. MACHINE INFORMATION

Intended use

This scroll saw is great for making toys, puzzles,

games, fretwork and jewelry. Because of its

cutting capacity it is a handy do-it-yourself tool.

It cuts wood up to 50 mm thick as well as plastics

and non-ferrous metals.

Technical specifications

Voltage 230 V ~

Frequency 50 Hz

Power input 120 W

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm SSM1007 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info