Bedienungsanleitung Ferm TSM1029 - FZB-250-1500 (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

634179

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Ferm 9

2. Areallthelockinghandlessecured?

3. Isthefenceparalleltothesawblade?

4. Istheprotectivecapworkingproperly?

5. Areyouwearingsafetygoggles?

6. Isthesawbladenotrubbingagainst

anything?

It is absolutely necessary to take these

points into consideration before you

start work!

Lengthwise sawing

• Securethefencetothecorrectmeasuring

positionandremovethecut-offguidefrom

thebenchcarriage.

• Turnthesawbladeapproximately2mm

higherthanthetotalthicknessofthewood

tobesawn.

• Pressthewoodlightlytowardsthebench

andletitglideagainstthecut-offfence.

Remain at least 3 cm. from the front of

the saw blade before you switch on

the engine. The side of the wood

which is against the fence must be

completely straight. Keep your hands

at least 10 cm away from the saw

track to be followed.

• Switchontheengineandwaituntilthesaw

bladehasreachedthemaximumnumber

ofrevolutionsbeforeyoustartsawing.

• Whileyoupressthewoodagainstthe

benchandthefence,youcancarefully

pushthewoodthroughthesawblade

withoutforcingit.

• Neverpulltheworkpiecebackwards.

Ifnecessary,switchofftheengine

rstwithoutalteringthepositionofthe

workpiece.

Lengthwise sawing with a(vertical) mitre

Thismethodispracticallythesame,exceptthat

thesawbladeisplacedattheanglerequired.

With this type of method the fence

may only be along the righthand side

of the sawblade.

Lengthwise sawing of narrow workpieces

Assume that this process is extremely

dangerous.

Takeallthenecessarysafetymeasuresand

continuallypushtheworkpiecethrough(until

behindthesawblade)usingasyntheticaid

insteadofbyhand.

Crosswise sawing

• Removethefenceandapplythecross-cut

fenceintherighthandcarriage.

• Adjusttheheightofthesawblade(see

lengthwisesawing).

• Presstheworkpieceagainstthecross-cut

fenceandkeepatleast2,5cmdistance

fromthefrontofthesawblade.

• Switchontheengineandwaituntilthe

maximumnumberofrevolutionshasbeen

reached.

• Presstheworkpieceagainstthefence

andthebench.Carefullypushthewood

throughthesawblade.Continueuntil

behindthesawblade.Thenswitchoffthe

engineandkeepthispositionuntilthesaw

bladehasstoppedcompletelybeforeyou

removethewood.

• Neverpullthewoodback.Ifnecessary,

switchtheengineoffandkeepthe

positionuntilthesawbladehasstopped

completely.

Crosswise sawing with a vertical mitre

Thismethodispracticallythesame,exceptthat

thesawbladeisplacedintheanglerequired.

Only place the cross-cut fence on the

righthand side of the saw blade. Never

saw too small pieces of wood. Never

use your hands to carry out difcult

operations.

Crosswise sawing with a horizontal mitre

Withthismethodthecross-cutfencemust

besecuredattheanglerequired.Keepthe

workpiecepressedrmlyagainstthecross-cut

fenceandthebenchbeforeyoustartcuttingoff.

5. MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work

on the motor.

Themachineshavebeendesignedtooperate

overalongperiodoftimewithaminimumof

maintenance.Continuoussatisfactoryoperation

dependsuponpropermachinecareandregular

cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm TSM1029 - FZB-250-1500 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info