Bedienungsanleitung Ferm TSM1036 (Seite 7 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

764020

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

bottom of the bench saw machine and electric

motor for a longer machine life. Dust piles must

be removed.

10. Always lock the different degree set-ups before

you start processing.

11. Only buy suitable saw blades with a number

of revolutions of at least 6000 revolutions per

minute.

12. Only use the correct saw blade. Too small or too

big saw blades are extremely dangerous.

13. Regularly inspect the saw blade for any faults.

Replace the saw blade if necessary.

14. Grease the new saw blade and clean the flanges

before you assemble the new blade. Then

assemble the blade in the correct direction and

pull the flanges firmly using the central bolt.

15. Only use original flanges. All other types are not

suitable.

16. Never work without the protective cap of the

saw blade.

17. The moving part of the protective cap must also

remain assembled.

18. Never grease the saw blade while it is rotating.

19. Always keep your hands removed from the track

of the saw blades.

20. Never pick up the workpiece by grasping with

your hands along or behind the saw blade.

21. Ensure that the workpiece never touches

the saw blade before the machine has been

switched on.

22. Never process metal or stone sorts with this

machine.

23. Use support aids in order to support long

workpieces.

24. Never use the machine in a dangerous

environment, where inflammable gases or fluids

are present.

25. Never leave the machine unattended without

first disconnecting it from the mains voltage.

26. If you hear abnormal noises, try to trace them or

take the machine to a recognized fitter, or repair

company.

27. If a part is broken or damaged, replace it or

repair it immediately.

28. Never stand in the track of the saw blade but

stand to the left or the right of the saw bench.

29. Your hands must likewise be placed next to the

track of the saw blade.

30. Always use the push stick instead of your hands

to push the wood through the saw.

31. Always place the wood at the front of the saw

bench and then push it further back.

32. For mitring only the adjustable guide must be

used and the fence must be removed.

33. Never use the fence as a linear measure for

cutting off beams.

34. If the saw blade is locked: first switch off the

machine before you attend to the fault.

35. Avoid workpieces hitting back in your direction

by taking the following measures:

• Always use sharp saw blades.

• Do not saw too small workpieces.

• Never release the workpiece before it has

been completely pushed through the saw.

• Always adjust the guide parallel to the saw

blade.

• Never remove the saw protection.

36. Before you continue sawing, ensure that you are

standing firmly and that your hands are in the

required position.

37. Never use thinners to clean the machine. Only

use a damp cloth for cleaning.

38. Do not use saw blades which are damaged or

deformed.

39. Replace table insert when worn.

40.

Only use saw blades specified by the

manufacturer that are intended for working with

wood or similar materials according to EN847-1.

41. Take care that the selection of the saw blade

depends on the material to be cut.

42. Connect tabelsaws to a dust-collecting device

when sawing.

43. Use and correct adjustment of the riving knife

44. Use and correct adjustment of the upper saw

blade quard.

45. Take care when slotting.

Make sure, when changing the saw blade, the

blade width is not smaller and the main blade

thickness of the saw blade is not greater than the

thickness of the riving knife.

Wear personal protective equipment, these could

include:

• Hearing protection to reduce the risk of hearing

loss

• Eye protection

• Inhale respiratory protection to reduce the risk of

harmful dust

• Gloves when handling the blades and rough

materials (recommendation, saw blades, are

whenever practicable, carried in a container)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm TSM1036 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info